Pendleton Y J, Tielens A G, Werner M W
NASA Ames Research Center, USA.
Astrophys J. 1990 Jan 20;349(1):107-19. doi: 10.1086/168298.
We have developed a model for reflection nebulae around luminous infrared sources embedded in dense dust clouds. The aim of this study is to determine the sizes of the scattering grains. In our analysis, we have adopted an MRN-like power-law size distribution (Mathis, Rumpl, and Nordsieck) of graphite and silicate grains, but other current dust models would give results which were substantially the same. In the optically thin limit, the intensity of the scattered light is proportional to the dust column density, while in the optically thick limit, it reflects the grain albedo. The results show that the shape of the infrared spectrum is the result of a combination of the scattering properties of the dust, the spectrum of the illuminating source, and foreground extinction, while geometry plays a minor role. Comparison of our model results with infrared observations of the reflection nebula surrounding OMC-2/IRS 1 shows that either a grain size distribution like that found in the diffuse interstellar medium, or one consisting of larger grains, can explain the observed shape of the spectrum. However, the absolute intensity level of the scattered light, as well as the observed polarization, requires large grains (approximately 5000 angstroms). By adding water ice mantles to the silicate and graphite cores, we have modeled the 3.08 micrometers ice band feature, which has been observed in the spectra of several infrared reflection nebulae. We show that this ice band arises naturally in optically thick reflection nebulae containing ice-coated grains. We show that the shape of the ice band is diagnostic of the presence of large grains, as previously suggested by Knacke and McCorkle. Comparison with observations of the BN/KL reflection nebula in the OMC-1 cloud shows that large ice grains (approximately 5000 angstroms) contribute substantially to the scattered light.
我们已经建立了一个模型,用于研究嵌入密集尘埃云中的发光红外源周围的反射星云。本研究的目的是确定散射颗粒的大小。在我们的分析中,我们采用了类似于MRN(Mathis、Rumpl和Nordsieck)的石墨和硅酸盐颗粒幂律尺寸分布,但其他当前的尘埃模型会给出基本相同的结果。在光学薄极限下,散射光的强度与尘埃柱密度成正比,而在光学厚极限下,它反映了颗粒反照率。结果表明,红外光谱的形状是尘埃散射特性、照明源光谱和前景消光共同作用的结果,而几何形状的作用较小。将我们的模型结果与围绕OMC-2/IRS 1的反射星云的红外观测结果进行比较表明,要么是弥漫星际介质中发现的那种颗粒尺寸分布,要么是由较大颗粒组成的分布,都可以解释观测到的光谱形状。然而,散射光的绝对强度水平以及观测到的偏振需要较大的颗粒(约5000埃)。通过在硅酸盐和石墨核心上添加水冰幔,我们对在几个红外反射星云光谱中观测到的3.08微米冰带特征进行了建模。我们表明,这个冰带在含有覆冰颗粒的光学厚反射星云中自然出现。我们表明,如Knacke和McCorkle之前所建议的,冰带的形状可诊断大颗粒的存在。与OMC-1云中BN/KL反射星云的观测结果比较表明,大冰颗粒(约5000埃)对散射光有很大贡献。