Nastev M, Therrien R, Lefebvre R, Gélinas P
Geological Survey of Canada, Quebec Geoscience Centre, Sainte-Foy, Canada.
J Contam Hydrol. 2001 Nov;52(1-4):187-211. doi: 10.1016/s0169-7722(01)00158-9.
Landfill gas, originating from the anaerobic biodegradation of the organic content of waste, consists mainly of methane and carbon dioxide, with traces of volatile organic compounds. Pressure, concentration and temperature gradients that develop within the landfill result in gas emissions to the atmosphere and in lateral migration through the surrounding soils. Environmental and safety issues associated with the landfill gas require control of off-site gas migration. The numerical model TOUGH2-LGM (Transport of Unsaturated Groundwater and Heat-Landfill Gas Migration) has been developed to simulate landfill gas production and migration processes within and beyond landfill boundaries. The model is derived from the general non-isothermal multiphase flow simulator TOUGH2, to which a new equation of state module is added. It simulates the migration of five components in partially saturated media: four fluid components (water, atmospheric air, methane and carbon dioxide) and one energy component (heat). The four fluid components are present in both the gas and liquid phases. The model incorporates gas-liquid partitioning of all fluid components by means of dissolution and volatilization. In addition to advection in the gas and liquid phase, multi-component diffusion is simulated in the gas phase. The landfill gas production rate is proportional to the organic substrate and is modeled as an exponentially decreasing function of time. The model is applied to the Montreal's CESM landfill site, which is located in a former limestone rock quarry. Existing data were used to characterize hydraulic properties of the waste and the limestone. Gas recovery data at the site were used to define the gas production model. Simulations in one and two dimensions are presented to investigate gas production and migration in the landfill, and in the surrounding limestone. The effects of a gas recovery well and landfill cover on gas migration are also discussed.
垃圾填埋气源于垃圾中有机成分的厌氧生物降解,主要由甲烷和二氧化碳组成,并含有微量挥发性有机化合物。垃圾填埋场内形成的压力、浓度和温度梯度导致气体排放到大气中,并通过周围土壤横向迁移。与垃圾填埋气相关的环境和安全问题需要控制场外气体迁移。数值模型TOUGH2-LGM(非饱和地下水与热-垃圾填埋气迁移传输模型)已被开发出来,用于模拟垃圾填埋气在填埋场边界内外的产生和迁移过程。该模型源自通用的非等温多相流模拟器TOUGH2,并添加了一个新的状态方程模块。它模拟了部分饱和介质中五种成分的迁移:四种流体成分(水、大气、甲烷和二氧化碳)和一种能量成分(热)。这四种流体成分同时存在于气相和液相中。该模型通过溶解和挥发对所有流体成分进行气液分配。除了气相和液相中的平流,还模拟了气相中的多组分扩散。垃圾填埋气的产生速率与有机底物成正比,并被建模为时间的指数递减函数。该模型应用于蒙特利尔的CESM垃圾填埋场,该填埋场位于一个以前的石灰石采石场。现有的数据被用来表征垃圾和石灰石的水力特性。该场地的气体回收数据被用来定义气体产生模型。给出了一维和二维模拟结果,以研究垃圾填埋场及其周围石灰石中的气体产生和迁移情况。还讨论了气体回收井和垃圾填埋覆盖层对气体迁移的影响。