Mechefske Chris K, Wu Yuhua, Rutt Brian K
Dept. of Mechanical Engineering, Queens' University, Kingston, Ontario, Canada.
J Biomech Eng. 2002 Aug;124(4):450-5. doi: 10.1115/1.1488169.
High-field, high-speed Magnetic Resonance Imaging (MRI) generates high sound levels within and nearby the scanner. The mechanism and process that produces the gradient magnetic field (a cylindrical electro-magnet, called the gradient coil cylinder, which produces a spatially and temporally varying magnetic field inside a static background magnetic field) is the primary source of this noise. This noise can cause difficulties in verbal communication in and around the scanner, heightened patient anxiety, temporary hearing loss and possible permanent hearing impairment for health care workers and patients. In order to effectively suppress the sound radiation from the gradient coil cylinder the sound field within and nearby the gradient coil needs to be characterized This characterization may be made using an analytical solution of the sound pressure field, computational simulation, measurement analysis or some combination of these three methods. This paper presents the computational simulation and measurement results of a study of the sound radiation from a head and neck gradient coil cylinder within a 4 Tesla MRI whole body scanner. The measurement results for the sound pressure level distribution along the centerline of the gradient coil cylinder are presented. The sound pressure distributions predicted from Finite Element Analysis of the gradient coil movement during operation and subsequent Boundary Element Analysis of the sound field generated are also presented. A comparison of the measured results and the predicted results shows close agreement. Because of the extremely complex nature of the analytical solution for the gradient coil cylinder, a treatment of the analytical solution and comparison to the computational results for a simple cylinder vibrating in a purely radial direction are also presented and also show close agreement between the two methods thus validating the computational approach used with the more complex gradient coil cylinder.
高场、高速磁共振成像(MRI)在扫描仪内部及附近会产生高强度噪声。产生梯度磁场(一个圆柱形电磁铁,称为梯度线圈圆柱体,在静态背景磁场内产生空间和时间上变化的磁场)的机制和过程是这种噪声的主要来源。这种噪声会给扫描仪内部及周围的言语交流带来困难,加剧患者的焦虑情绪,导致医护人员和患者出现暂时性听力损失以及可能的永久性听力损伤。为了有效抑制梯度线圈圆柱体的声辐射,需要对梯度线圈内部及附近的声场进行表征。这种表征可以使用声压场的解析解、计算模拟、测量分析或这三种方法的某种组合来进行。本文介绍了在一台4特斯拉全身MRI扫描仪中对头颈部梯度线圈圆柱体声辐射研究的计算模拟和测量结果。给出了沿梯度线圈圆柱体中心线的声压级分布的测量结果。还给出了根据梯度线圈在运行期间的运动进行有限元分析以及随后对所产生的声场进行边界元分析预测的声压分布。测量结果与预测结果的比较显示出密切的一致性。由于梯度线圈圆柱体解析解的性质极其复杂,本文还给出了对解析解的处理以及与在纯径向方向振动的简单圆柱体的计算结果的比较,这两种方法之间也显示出密切的一致性,从而验证了用于更复杂的梯度线圈圆柱体的计算方法。