Court Laurence E, Dong Lei
The Department of Radiation Physics, The University of Texas M. D. Anderson Cancer Center, Houston, Texas 77030, USA.
Med Phys. 2003 Oct;30(10):2750-7. doi: 10.1118/1.1608497.
The recent development of integrated computed tomography (CT)/linear accelerator (LINAC) combinations, where the CT scanner and the LINAC use the same patient couch, and of kilovoltage cone-beam CT systems attached to the LINAC gantry, means that suitable hardware is now available for CT-guided localization of the prostate. Clinical implementation is, however, currently impeded by the lack of robust and accurate software tools to compare the position of the prostate in the CT images used for the treatment plan with its position in the daily CT images. Manual registration of the planning CT images with the daily CT images can be slow and can introduce significant inter-user variations. We have developed an automatic registration technique that is not adversely influenced by changes in prostate shape, size or orientation, presence of rectal gas, or bladder filling. The cost function used in the registration is the mean absolute difference in CT numbers voxel-by-voxel between the daily CT image and the planning CT image for a volume extracted from the planning CT images using the original physician-drawn gross tumor volume contours. To enhance soft tissue contrast in the prostate region and to reduce the impact of rectal gas calcifications and bone on the registration, voxels with CT numbers that represent gas or bone are filtered out from the calculation. The results of the automatic registration agreed with the mean results of seven human observers, with standard deviations of 0.5 mm, 0.5 mm, and 1.0 mm in the left/right (RL), anterior/posterior (AP), and superior/inferior (SI) directions, respectively, for a patient that was relatively easy to localize. Agreement (one standard deviation) for a patient that was difficult to localize was 0.6 mm, 1.4 mm, and 1.9 mm in the RL, AP, and SI directions, respectively. These results are better than the interuser uncertainties reported for a manual alignment technique and are close to the reported intrauser uncertainties. The results are independent of the shape of contours in the original treatment plan, reducing the impact of interobserver variations in contouring the prostate. The algorithm is fast and reliable, allowing the entire CT localization process to take place in 5-9 minutes. In 120 CT image sets from seven patients, the failure rate was found to be less than 1%. The use of this algorithm will facilitate the clinical implementation of CT-guided localization of the prostate.
近期,集成式计算机断层扫描(CT)/直线加速器(LINAC)组合设备(其中CT扫描仪和LINAC使用同一患者治疗床)以及附着在LINAC机架上的千伏级锥形束CT系统的发展,意味着现在有了适用于前列腺CT引导定位的硬件。然而,目前临床应用受到阻碍,因为缺乏强大且准确的软件工具来比较用于治疗计划的CT图像中前列腺的位置与其在每日CT图像中的位置。将计划CT图像与每日CT图像进行手动配准可能会很缓慢,并且会引入显著的用户间差异。我们开发了一种自动配准技术,该技术不会受到前列腺形状、大小或方向变化、直肠气体存在或膀胱充盈的不利影响。配准中使用的代价函数是针对从计划CT图像中使用原始医生绘制的大体肿瘤体积轮廓提取的一个体积,每日CT图像与计划CT图像之间逐个体素的CT值平均绝对差。为了增强前列腺区域的软组织对比度并减少直肠气体钙化和骨骼对配准的影响,在计算中滤除了代表气体或骨骼的CT值的体素。对于相对容易定位的一名患者,自动配准结果与七名人类观察者的平均结果一致,在左右(RL)、前后(AP)和上下(SI)方向上的标准差分别为0.5毫米、0.5毫米和1.0毫米;对于难以定位的一名患者,在RL、AP和SI方向上的一致性(一个标准差)分别为0.6毫米、1.4毫米和1.9毫米。这些结果优于手动对齐技术报告的用户间不确定性,并且接近报告的用户内不确定性。结果与原始治疗计划中的轮廓形状无关,减少了前列腺轮廓绘制中观察者间差异带来的影响。该算法快速且可靠,整个CT定位过程可在5 - 9分钟内完成。在来自七名患者的120组CT图像中,发现失败率低于1%。该算法的使用将有助于前列腺CT引导定位的临床应用。