Effect of 2-hydroxyethyl methacrylate pre-treatment on micro-tensile bond strength of resin composite to demineralized dentin.

The purpose of this study was to evaluate the effect of 2-hydroxyethyl methacrylate (HEMA) application on the micro-tensile bond strength of resin composite to demineralized dentin. Artificially demineralized lesions were formed on bovine dentin surfaces and treated with 10, 30, 50, 70 and 100 wt% HEMA aqueous solution. The surfaces were then applied and covered with SE Bond and AP-X according to the manufacturer's instruction. After immersion in 37 degrees C water for 24 h, bond strength were measured using a universal testing machine. Bond strengths to both demineralized dentin and normal dentin, without HEMA application, were also measured. Scanning electron microscopic (SEM) observation and confocal laser scanning microscopy (CLSM) analysis at the resin-dentin interface were also performed. The bond strength data were statistically compared with anova and Scheffe's test (P < 0.05). Bond strength to demineralized dentin treated with over 30 wt% HEMA aqueous solution were significantly higher than that to demineralized dentin without HEMA application, but significantly lower than that to normal dentin. SEM observation revealed that the hybrid layer and resin-tags thickened and lengthened with HEMA application. In CLSM, the diffusion of adhesive primer into demineralized dentin increased with HEMA application. These results indicated that HEMA application might increase the bond strength to demineralized dentin by the enhancement of resin monomer penetration of HEMA.