Suppr超能文献

腕骨能轴向旋转多少度?一项活体研究。

How much can carpus rotate axially? An in vivo study.

作者信息

Gupta Ajay, Moosawi Nawal A

机构信息

University College of Medical Sciences and GTB Hospital, Shahdara, Delhi, India.

出版信息

Clin Biomech (Bristol). 2005 Feb;20(2):172-6. doi: 10.1016/j.clinbiomech.2004.09.014.

Abstract

BACKGROUND

Supination and pronation movements occur primarily at the forearm though are possible at the wrist joint too. The axial rotation of the wrist also called the radiometacarpal rotation has been quantified but for its passive range which may never occur during the day-to-day routine activities. It is normally not possible for the wrist joint to rotate axially in an active manner. However, voluntary effort to rotate the forearm while keeping the hand fixed on a custom designed device is able to provide active rotation of the wrist which occurs in a manner similar to that occurring during the daily routine activities.

METHODS

The present study measured axial rotation of the wrist in 20 asymptomatic volunteers who had axial CT done of their wrist with elbow in 10-30 degrees flexion and forearm positioned parallel to the long axis of the table with thumb pointing up towards the roof. The examination was repeated twice while the subject actively tried to supinate and pronate the forearm against the fixed hand and the metacarpals using maximum voluntary effort on a custom designed positioning device.

FINDINGS

The mean radiometacarpal supination and pronation were 17.15 degrees (SD 7.9) and 17.0 degrees (SD 10) respectively. The movement was found to occur predominantly at midcarpal joint with radiocarpal joint contributing only 18% to supination and 31% to pronation.

INTERPRETATION

The radiometacarpal rotation has a crucial bearing in the development of the wrist prostheses. The design of the prostheses should consider accommodating axial movements that occur in the carpus during the activities of daily living.

摘要

背景

旋后和旋前运动主要发生在前臂,不过在腕关节也有可能发生。腕关节的轴向旋转,也称为桡腕掌旋转,其被动范围已被量化,但这可能在日常活动中从未出现过。腕关节通常无法主动进行轴向旋转。然而,在保持手部固定在一个定制设计的装置上的同时,主动转动前臂的努力能够使腕关节进行主动旋转,其发生方式类似于日常活动中发生的情况。

方法

本研究测量了20名无症状志愿者的腕关节轴向旋转,这些志愿者的腕部进行了轴向CT扫描,肘部处于10 - 30度屈曲,前臂与检查台的长轴平行,拇指向上指向天花板。在受试者使用定制设计的定位装置,以最大自主努力主动尝试使前臂相对于固定的手部和掌骨进行旋后和旋前时,检查重复进行了两次。

结果

桡腕掌旋后的平均角度为17.15度(标准差7.9),旋前的平均角度为17.0度(标准差10)。发现该运动主要发生在腕中关节,桡腕关节对旋后的贡献仅为18%,对旋前的贡献为31%。

解读

桡腕掌旋转对腕关节假体的研发至关重要。假体的设计应考虑适应日常生活活动中腕骨发生的轴向运动。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验