Suppr超能文献

使用变形强度分布对图像引导的调强放射治疗进行在线修正,以考虑分次间的解剖结构变化。

Use of deformed intensity distributions for on-line modification of image-guided IMRT to account for interfractional anatomic changes.

作者信息

Mohan Radhe, Zhang Xiaodong, Wang He, Kang Yixiu, Wang Xiaochun, Liu Helen, Ang K Kian, Kuban Deborah, Dong Lei

机构信息

Department of Radiation Physics, Unit 94, The University of Texas M. D. Anderson Cancer Center, 1515 Holcombe Blvd., Houston, TX 77030, USA.

出版信息

Int J Radiat Oncol Biol Phys. 2005 Mar 15;61(4):1258-66. doi: 10.1016/j.ijrobp.2004.11.033.

Abstract

PURPOSE

Recent imaging studies have demonstrated that there can be significant changes in anatomy from day to day and over the course of radiotherapy as a result of daily positioning uncertainties and physiologic and clinical factors. There are a number of strategies to minimize such changes, reduce their impact, or correct for them. Measures to date have included improved immobilization of external and internal anatomy or adjustment of positions based on portal or ultrasound images. Perhaps the most accurate way is to use CT image-guided radiotherapy, for which the possibilities range from simple correction of setup based on daily CT images to on-line near real-time intensity modulated radiotherapy (IMRT) replanning. In addition, there are numerous intermediate possibilities. In this paper, we report the development of one such intermediate method that takes into account anatomic changes by deforming the intensity distributions of each beam based on deformations of anatomy as seen in the beam's-eye-view.

METHODS AND MATERIALS

The intensity distribution deformations are computed based on anatomy deformations discerned from the changes in the current image relative to a reference image (e.g., the pretreatment CT scan). First, a reference IMRT plan is generated based on the reference CT image. A new CT image is acquired using an in-room CT for every fraction. The anatomic structure contours are obtained for the new image. (For this article, these contours were manually drawn. When image guided IMRT methods are implemented, anatomic structure contours on subsequent images will likely be obtained with automatic or semiautomatic means. This could be achieved by, for example, first deforming the original CT image to match today's image, and then using the same deformation transformation to map original contours to today's image.) The reference intensity distributions for each beam are then deformed so that the projected geometric relationship within the beam's-eye-view between the anatomy (both target and normal tissues) extracted from the reference image and the reference intensity distribution is the same as (or as close as possible to) the corresponding relationship between anatomy derived from today's image and the newly deformed intensity distributions. To verify whether the dose distributions calculated using the deformed intensity distributions are acceptable for treatment as compared to the original intensity distributions, the deformed intensities are transformed into leaf sequences, which are then used to compute intensity and dose distributions expected to be delivered. The corresponding dose-volume histograms and dose-volume and dose-response indices are also computed. These data are compared with the corresponding data derived (a) from the original treatment plan applied to the original image, (b) from the original treatment plan applied to today's image, and (c) from a new full-fledged IMRT plan designed based on today's image.

RESULTS

Depending on the degree of anatomic changes, the use of an IMRT plan designed based on the original planning CT for the treatment of the current fraction could lead to significant differences compared to the intended dose distributions. CT-guided setup compared to the setup based on skin marks or bony landmarks may improve dose distributions somewhat. Replanning IMRT based on the current fraction's image yields the best physically deliverable plan (the "gold standard"). For the prostate and head-and-neck examples studied as proof of principle, the results of deforming intensities within each beam based on the anatomy seen in the beam's-eye-view are a good approximation of full-fledged replanning compared with other alternatives.

CONCLUSIONS

Our preliminary results encourage us to believe that deforming intensities taking into account deformation in the anatomy may be a rapid way to produce new treatment plans on-line in near real-time based on daily CT images. The methods we have developed need to be applied to a group of patients for both prostate and head-and-neck cases to confirm the validity of our approach.

摘要

目的

近期的影像学研究表明,由于每日定位的不确定性以及生理和临床因素,放疗期间解剖结构可能会在一天内以及整个放疗过程中发生显著变化。有多种策略可将此类变化降至最低、减少其影响或对其进行校正。迄今为止所采取的措施包括改善外部和内部解剖结构的固定,或根据射野图像或超声图像调整体位。或许最精确的方法是使用CT图像引导放疗,其应用范围从基于每日CT图像的简单摆位校正到在线近实时调强放疗(IMRT)重新计划。此外,还有许多中间可能性。在本文中,我们报告了一种这样的中间方法的开发情况,该方法通过基于射野视角中所见的解剖结构变形来使各射束的强度分布变形,从而考虑解剖结构的变化。

方法和材料

强度分布变形是根据从当前图像相对于参考图像(例如治疗前CT扫描)的变化中识别出的解剖结构变形来计算的。首先,基于参考CT图像生成一个参考IMRT计划。每次分割时使用室内CT获取一幅新的CT图像。获取新图像的解剖结构轮廓。(在本文中,这些轮廓是手动绘制的。当实施图像引导IMRT方法时,后续图像上的解剖结构轮廓很可能通过自动或半自动方式获取。例如,可以先使原始CT图像变形以匹配当日图像,然后使用相同的变形变换将原始轮廓映射到当日图像来实现。)然后使各射束的参考强度分布变形,以便在射野视角内,从参考图像中提取的解剖结构(靶区和正常组织)与参考强度分布之间的投影几何关系与从当日图像得出的解剖结构与新变形的强度分布之间的相应关系相同(或尽可能接近)。为了验证与原始强度分布相比,使用变形后的强度分布计算出的剂量分布是否适合治疗,将变形后的强度转换为叶片序列,然后用于计算预期给予的强度和剂量分布。还计算相应的剂量体积直方图以及剂量体积和剂量反应指数。将这些数据与从以下方面得出的相应数据进行比较:(a) 应用于原始图像的原始治疗计划;(b) 应用于当日图像的原始治疗计划;(c) 根据当日图像设计的全新的完整IMRT计划。

结果

根据解剖结构变化的程度,使用基于原始计划CT设计的IMRT计划来治疗当前分割可能会导致与预期剂量分布存在显著差异。与基于皮肤标记或骨性标志的摆位相比,CT引导摆位可能会在一定程度上改善剂量分布。基于当前分割的图像重新计划IMRT可得到最佳的实际可给予计划(“金标准”)。作为原理验证而研究的前列腺和头颈部病例示例中,基于射野视角中所见的解剖结构使各射束内的强度变形的结果,与其他方法相比,是完整重新计划的良好近似。

结论

我们的初步结果使我们相信,考虑解剖结构变形来使强度变形可能是一种基于每日CT图像近乎实时在线生成新治疗计划的快速方法。我们所开发的方法需要应用于一组前列腺和头颈部病例的患者,以确认我们方法的有效性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验