Gil Eun S, Spontak Richard J, Hudson Samuel M
Fiber and Polymer Science Program, North Carolina State University, Raleigh, NC 27695, USA.
Macromol Biosci. 2005 Aug 12;5(8):702-9. doi: 10.1002/mabi.200500076.
Novel protein-based hydrogels have been prepared by blending gelatin (G) with amorphous Bombyx mori silk fibroin (SF) and subsequently promoting the formation of beta-sheet crystals in SF upon exposure to methanol or methanol/water solutions. Differential scanning calorimetry of the resultant hydrogels confirms the presence and thermoreversibility of the G helix-coil transition between ambient and body temperature at high G concentrations. At low G concentrations, this transition is shifted to higher temperatures and becomes progressively less pronounced. Complementary dynamic rheological measurements reveal solid-liquid cross-over at the G helix-coil transition temperature typically between 30 and 36 degrees C in blends prior to the formation of beta-sheet crystals. Introducing the beta-sheet conformation in SF stabilizes the hydrogel network and extends the solid-like behavior of the hydrogels to elevated temperatures beyond body temperature with as little as 10 wt.-% SF. The temperature-dependent elastic modulus across the G helix-coil transition is reversible, indicating that the conformational change in G can be used in stabilized G/SF hydrogels to induce thermally triggered encapsulant release.
通过将明胶(G)与无定形家蚕丝素蛋白(SF)混合,随后在暴露于甲醇或甲醇/水溶液时促进SF中β-折叠晶体的形成,制备了新型基于蛋白质的水凝胶。所得水凝胶的差示扫描量热法证实了在高G浓度下,环境温度和体温之间G螺旋-卷曲转变的存在和热可逆性。在低G浓度下,这种转变转移到更高的温度,并且逐渐变得不那么明显。互补的动态流变学测量表明,在β-折叠晶体形成之前,在G螺旋-卷曲转变温度下,共混物通常在30至36摄氏度之间出现固-液转变。在SF中引入β-折叠构象可稳定水凝胶网络,并将水凝胶的类固体行为扩展到高于体温的升高温度,只需10 wt.-%的SF。G螺旋-卷曲转变过程中随温度变化的弹性模量是可逆的,这表明G的构象变化可用于稳定的G/SF水凝胶中,以诱导热触发的封装剂释放。