Müller J O, Su D S, Jentoft R E, Wild U, Schlögl R
Department of Inorganic Chemistry (European Laboratory for Catalysis and Surface Science), Fritz-Haber-Institute of the Max-Planck-Society, Faradayweg 4-6, D-14195 Berlin, Germany.
Environ Sci Technol. 2006 Feb 15;40(4):1231-6. doi: 10.1021/es0512069.
Soot particulate collected from a Euro III heavy duty diesel engine run under black smoke conditions was investigated using thermogravimetry, transmission electron microscopy, electron energy loss spectroscopy, and X-ray photoelectron spectroscopy. The characterization results are compared with those of commercial carbon black. The onset temperature toward oxidation of the diesel engine soot in 5% O2 is 150 degrees C lower than that for carbon black. The burn out temperature for the diesel engine soot is 60 degrees C lower than that of the carbon black. The soot primary particles exhibit a core-shell structure. The shell of the soot particles consists of homogeneously stacked basic structure units. The commercial carbon lamp black is more graphitized than the diesel engine soot, whereas the diesel engine soot contains more carbon in aromatic nature than the carbon black and is highly surface-functionalized. Our findings reveal that technical carbon black is not a suitable model for the chemistry of the diesel engine soot.
利用热重分析法、透射电子显微镜、电子能量损失谱和X射线光电子能谱,对从一台在黑烟条件下运行的欧III重型柴油发动机收集的烟尘颗粒进行了研究。将表征结果与商用炭黑的结果进行了比较。在5%氧气中,柴油发动机烟尘开始氧化的温度比炭黑低150摄氏度。柴油发动机烟尘的燃尽温度比炭黑低60摄氏度。烟尘一次颗粒呈现核壳结构。烟尘颗粒的壳层由均匀堆叠的基本结构单元组成。商用炭黑比柴油发动机烟尘更石墨化,而柴油发动机烟尘比炭黑含有更多具有芳香性质的碳,并且具有高度的表面功能化。我们的研究结果表明,工业炭黑不是柴油发动机烟尘化学性质的合适模型。