Petrou Myria, Quint Leslie E, Nan Bin, Baker Laurence H
Department of Radiology, University of Michigan, 1500 E Medical Center Dr., Ann Arbor, MI 48109, USA.
AJR Am J Roentgenol. 2007 Feb;188(2):306-12. doi: 10.2214/AJR.05.1063.
The purpose of our study was to assess differences in volumetric measurements of pulmonary nodules obtained using different CT slice thicknesses; correlate these differences with nodule size, shape, and margination; and compare measurements generated by two different software packages.
Seventy-five individual nodules identified on 29 lowdose, unenhanced, MDCT chest examinations were selected for volumetric analysis. Each image data set was reconstructed in three ways (slice thickness/reconstruction interval): 1.25 mm/0.625 mm, 2.5 mm/2 mm, and 5 mm/2.5 mm. Volumetric measurements were made on all 75 nodules at 1.25- and 2.5-mm slice thicknesses and on 57 of 75 nodules at the 5-mm thickness using Volume Analysis software. For 69 of 75 nodules, measurements were obtained on 1.25- and 2.5-mm-thick sections using a different commercially available software system, LN500 R2 software. Volume variability between different slice thicknesses was correlated with nodule diameter, shape, and margination using multiple linear regression. Percent differences between measurements obtained with the two software systems were calculated. Significance of relative volume differences between slice thicknesses and software packages was assessed using a one-sample Student's t-test.
Although statistically significant differences in volumes between different section thicknesses were seen only for the tiny nodule size group, many individual nodules showed substantial volume variation. Significant differences were seen in nodule volume variability for smaller nodules (3-10 mm) compared with larger nodules (> or = 11 mm) (p < 0.0001), as well as spiculated compared with smooth nodules, within a single size group (p < 0.05). No effect of nodule shape (round vs elongated) was noted. Statistically significant differences in measurements obtained with the two software systems were seen only with 2.5-mm-thick sections (p = 0.001).
CT slice thickness variation resulted in significant differences in volume measurements for tiny nodules. A spiculated margin was shown to have a significant effect on nodule volume variability within a single size group. Use of different software packages resulted in significant volume measurement differences at the 2.5-mm CT slice thickness.
我们研究的目的是评估使用不同CT层厚获得的肺结节体积测量值的差异;将这些差异与结节大小、形状及边缘情况相关联;并比较两种不同软件包生成的测量值。
从29例低剂量、未增强的胸部MDCT检查中识别出的75个单个结节被选作体积分析。每个图像数据集以三种方式重建(层厚/重建间隔):1.25毫米/0.625毫米、2.5毫米/2毫米和5毫米/2.5毫米。使用体积分析软件对所有75个结节进行1.25毫米和2.5毫米层厚的体积测量,对75个结节中的57个进行5毫米层厚的体积测量。对于75个结节中的69个,使用另一种商用软件系统LN500 R2软件在1.25毫米和2.5毫米厚的层面上进行测量。使用多元线性回归将不同层厚之间的体积变异性与结节直径、形状及边缘情况相关联。计算两种软件系统获得的测量值之间的百分比差异。使用单样本学生t检验评估层厚与软件包之间相对体积差异的显著性。
虽然仅在微小结节大小组中观察到不同层厚之间的体积存在统计学显著差异,但许多单个结节显示出显著的体积变化。与较大结节(≥11毫米)相比,较小结节(3 - 10毫米)在结节体积变异性方面存在显著差异(p < 0.0001),并且在单个大小组内,有毛刺的结节与光滑结节相比也存在显著差异(p < 0.05)。未观察到结节形状(圆形与细长形)的影响。仅在2.5毫米厚的层面上观察到两种软件系统获得的测量值存在统计学显著差异(p = 0.001)。
CT层厚变化导致微小结节的体积测量存在显著差异。在单个大小组内,有毛刺的边缘对结节体积变异性有显著影响。使用不同软件包在2.5毫米CT层厚时导致体积测量存在显著差异。