Rehorek Astrid, Plum Alexander
Faculty of Process Engineering, Energy and Mechanical Systems, Institute of Chemical Engineering and Plant Design, University of Applied Sciences Cologne, Betzdorfer Str. 2, 50679, Cologne, Germany.
Anal Bioanal Chem. 2007 Aug;388(8):1653-62. doi: 10.1007/s00216-007-1390-0. Epub 2007 Jun 20.
Sixteen sulfonated and unsulfonated azo dyes as well as eleven sulfonated and unsulfonated aromatic amines were analyzed and qualitatively characterized by means of pyrolysis gas chromatography/mass spectrometry at different temperatures. Aniline and aminonaphthalene were found to be the dominant pyrolysis products of sulfonated aromatic amines and dyes. Azo dye and dye class specific key compounds such as benzidine, vinyl-p-base and 4-aminoazobenzene could be identified by pyrolysis gas chromatography/mass spectrometry of commercial acid, cationic, direct, reactive and solvent dyes. 500 degrees C was the optimal pyrolysis temperature for most of the pyrolyzed compounds. The method was applied to a dried sample of a textile wastewater concentrate from a dyeing process. Reactive azo dyes of the group of Remazol dyes and anthraquinone dyes could be identified as the major compounds of the sample. The finding of caprolactam (a printing additive) suggests that the wastewater contained effluent from a process of heat-activated printing with reactive dyes. p-Chloraniline, a banned aromatic amine, was identified. Chemical reduction of the wastewater sample prior to pyrolysis resulted in the release of volatile aromatic amines and aided the classification of several products of pyrolysis.
采用热解气相色谱/质谱联用技术,在不同温度下对16种磺化和未磺化的偶氮染料以及11种磺化和未磺化的芳香胺进行了分析和定性表征。结果发现,苯胺和氨基萘是磺化芳香胺和染料的主要热解产物。通过对商业酸性、阳离子、直接、活性和溶剂染料进行热解气相色谱/质谱分析,可以鉴定出偶氮染料和染料类别特异性的关键化合物,如联苯胺、乙烯基对苯二胺和4-氨基偶氮苯。500℃是大多数热解化合物的最佳热解温度。该方法应用于一份来自印染工艺的纺织废水浓缩物的干燥样品。雷马素染料组的活性偶氮染料和蒽醌染料被鉴定为样品中的主要化合物。己内酰胺(一种印花添加剂)的发现表明,该废水含有活性染料热活化印花工艺产生的废水。鉴定出了一种禁用芳香胺对氯苯胺。热解前对废水样品进行化学还原,导致挥发性芳香胺的释放,并有助于对几种热解产物进行分类。