Suppr超能文献

标本收缩及其对乳腺癌切缘评估的影响。

Specimen shrinkage and its influence on margin assessment in breast cancer.

作者信息

Yeap Badrul H, Muniandy Suseela, Lee Suk-Kam, Sabaratnam Subathra, Singh Manjit

机构信息

Department of General Surgery, Penang General Hospital, Penang, Malaysia.

出版信息

Asian J Surg. 2007 Jul;30(3):183-7. doi: 10.1016/S1015-9584(08)60020-2.

Abstract

OBJECTIVE

The determination of tumour-free margin in breast cancer is crucial in deciding subsequent patient management. To exemplify the phenomenon of margin contraction during specimen preparation for histopathological analysis, we quantified the shrinkage of breast specimens as a result of formalin fixation.

METHODS

Fifty consecutive mastectomy and wide excision specimens were prospectively appraised. The closest free margin and maximal tumour diameter of fresh, unprepared specimens were recorded. These measurements were compared with the corresponding parameters following tissue fixation.

RESULTS

Following formalin fixation, the mean closest free margin of the specimens was found to have decreased from 10.28 mm to 6.78 mm (34%). The reduction of the mean diameter of the tumour itself was less significant, from 41.74 mm to 39.88 mm (4.5%).

CONCLUSION

Breast specimens undergo shrinkage after histological fixation, losing more than a third of their original closest free margin, whilst the tumour itself does not shrink substantially. This phenomenon has vital implications in the accuracy of margin analysis and consequent decisions on further management, including re-operation and the institution of adjuvant radiotherapy.

摘要

目的

确定乳腺癌手术切缘无癌对于决定后续患者治疗方案至关重要。为了例证组织病理学分析标本制备过程中的切缘收缩现象,我们对福尔马林固定导致的乳腺标本收缩进行了量化。

方法

前瞻性评估连续50例乳房切除术和广泛切除标本。记录新鲜、未处理标本的最接近切缘和最大肿瘤直径。将这些测量值与组织固定后的相应参数进行比较。

结果

福尔马林固定后,标本的平均最接近切缘从10.28毫米降至6.78毫米(减少34%)。肿瘤本身平均直径的减小不太显著,从41.74毫米降至39.88毫米(减少4.5%)。

结论

乳腺标本在组织学固定后会发生收缩,其最初最接近切缘的三分之一以上会丢失,而肿瘤本身收缩并不显著。这种现象对切缘分析的准确性以及包括再次手术和辅助放疗方案制定在内的后续治疗决策具有重要意义。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验