Alió J L, Ortiz D, Muftuoglu O, Garcia M J
Instituto Oftalmológico de Alicante, Vissum (Department of Refractive Surgery) and Division of Ophthalmology, Miguel Hernandez University, Medical School, Alicante, Spain.
Br J Ophthalmol. 2009 Oct;93(10):1313-8. doi: 10.1136/bjo.2007.131748. Epub 2008 Feb 21.
To compare the long-term outcomes of photorefractive keratectomy (PRK) and laser in situ keratomilesis (LASIK) for myopia between -6 and -10 D.
A retrospective, control-matched study including 68 eyes, 34 which underwent PRK and 34 LASIK, with myopia between -6 and -10 D, operated using the VISX 20/20 excimer laser, was performed. Optical zones of 5.5 to 6 mm were used. All PRK-treated eyes were matched with LASIK-treated eyes of the same age, spherical equivalent within +/-1.25 D, sphere within +/-1.5 D and cylinder within +/-2.5 D. All patients were evaluated 3 months, 1 year, 2 years, 5 years and 10 years after surgery. The main outcomes measures were refractive predictability and stability, safety, efficacy and re-treatment rate.
At 10 years, 20 (71%) and 23 (88%) were within +/-1.00 D after PRK and LASIK respectively. The re-treatment rate was 35% and 18% respectively. No eye lost more than two lines of BSCVA in both groups. The efficacy was 0.90 for PRK and 0.95 for LASIK.
Both PRK and LASIK were safe for moderate myopia. LASIK demonstrated slightly better efficacy, predictability, and less rate of re-treatment after 10 years. The technical improvements should be taken into account when comparing these results with those obtained more recently.
比较准分子原位角膜磨镶术(LASIK)和准分子激光角膜切削术(PRK)治疗-6至-10 D近视的长期效果。
进行了一项回顾性、对照匹配研究,纳入68只眼,其中34只接受PRK,34只接受LASIK,近视度数在-6至-10 D之间,使用VISX 20/20准分子激光进行手术。采用5.5至6 mm的光学区。所有接受PRK治疗的眼睛与年龄相同、等效球镜度数在±1.25 D以内、球镜度数在±1.5 D以内、柱镜度数在±2.5 D以内的接受LASIK治疗的眼睛进行匹配。所有患者在术后3个月、1年、2年、5年和10年进行评估。主要观察指标为屈光预测性和稳定性、安全性、有效性及再次治疗率。
10年后,PRK组和LASIK组分别有20只眼(71%)和23只眼(88%)的屈光度数在±1.00 D以内。再次治疗率分别为35%和18%。两组均无眼的最佳矫正视力下降超过两行。PRK的有效性为0.90,LASIK为0.95。
PRK和LASIK治疗中度近视均安全。LASIK在10年后显示出稍好的有效性、预测性和较低的再次治疗率。将这些结果与最近获得的结果进行比较时,应考虑技术改进因素。