Amado Elkin, Kerth Andreas, Blume Alfred, Kressler Jörg
Department of Chemistry, Martin Luther University Halle-Wittenberg, Halle (Saale), Germany.
Langmuir. 2008 Sep 16;24(18):10041-53. doi: 10.1021/la801768m. Epub 2008 Aug 13.
Novel water-soluble amphiphilic triblock copolymers poly(glycerol monomethacrylate)-b-poly(propylene oxide)-b-poly(glycerol monomethacrylate) (PGMA-b-PPO-b-PGMA) were synthesized because of their expected enhanced ability to interact with biological membranes compared to the well-known poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-b-PPO-b-PEO) block copolymers. Their bulkier hydrophilic PGMA blocks might induce a disturbance in the packing of liquid-crystalline lipid bilayers in addition to the effect caused by the hydrophobic PPO block alone. To gain a better insight into the polymer-membrane interactions at the molecular level, the adsorption kinetics and concomitant interactions of (PGMA14)(2-)PPO(34) with model membranes of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) were monitored using infrared reflection absorption spectroscopy (IRRAS) coupled with Brewster angle microscopy (BAM) and surface pressure (pi) measurements. The maximum penetration surface pressure of ca. 39 mN/m suggests that (PGMA14)(2-)PPO(34) is able to insert into lipid monolayers even above the so-called monolayer-bilayer equivalent pressure of 30-35 mN/m. Copolymer adsorption to a liquid-expanded DPPC-d62 monolayer proceeds in a two-step mechanism: (i) initially only the more hydrophobic PPO middle block penetrates the lipid monolayer; (ii) following the liquid-expanded-liquid-condensed (LE-LC) phase transition, the bulky PGMA hydrophilic blocks are dragged into the headgroup region as the PPO block inserts further into the fatty acid region. The adsorption kinetics is considerably faster for DMPC-d54 monolayers due to their higher fluidity. Copolymer adsorption to an LC-DPPC-d62 monolayer leads to a change in the monolayer packing by forcing the lipid alkyl chains into a more vertical orientation, their tilt angle with respect to the surface normal being reduced from initially 30 degrees +/- 3 degrees to 18 degrees +/- 3 degrees. BAM images rule out macroscopic phase separation and show that coalescence of DPPC-d62 LC domains takes place at relatively low surface pressures of pi > or = 23 mN/m, suggesting that (PGMA14)(2-)PPO (34) partitions into both LE as well as LC domains.
合成了新型水溶性两亲性三嵌段共聚物聚(甲基丙烯酸甘油酯)-b-聚(环氧丙烷)-b-聚(甲基丙烯酸甘油酯)(PGMA-b-PPO-b-PGMA),因为与著名的聚(环氧乙烷)-b-聚(环氧丙烷)-b-聚(环氧乙烷)(PEO-b-PPO-b-PEO)嵌段共聚物相比,预计它们与生物膜相互作用的能力会增强。其体积更大的亲水性PGMA嵌段除了单独由疏水性PPO嵌段引起的效应外,可能还会引起液晶脂质双层堆积的紊乱。为了在分子水平上更好地了解聚合物与膜的相互作用,使用红外反射吸收光谱(IRRAS)结合布鲁斯特角显微镜(BAM)和表面压力(π)测量,监测了(PGMA14)(2-)PPO(34)与二棕榈酰磷脂酰胆碱(DPPC)和二肉豆蔻酰磷脂酰胆碱(DMPC)模型膜的吸附动力学及伴随的相互作用。约39 mN/m的最大穿透表面压力表明,即使在高于所谓的单层-双层等效压力30 - 35 mN/m时,(PGMA14)(2-)PPO(34)也能够插入脂质单层中。共聚物对液体膨胀的DPPC-d62单层的吸附以两步机制进行:(i)最初只有疏水性更强的PPO中间嵌段穿透脂质单层;(ii)在液体膨胀-液体凝聚(LE-LC)相变之后,随着PPO嵌段进一步插入脂肪酸区域,体积较大的PGMA亲水性嵌段被拖入头基区域。由于DMPC-d54单层具有更高的流动性,其吸附动力学要快得多。共聚物对LC-DPPC-d62单层的吸附通过迫使脂质烷基链形成更垂直的取向而导致单层堆积发生变化,它们相对于表面法线的倾斜角从最初的30°±3°减小到18°±3°。BAM图像排除了宏观相分离,并表明DPPC-d62 LC域的聚结在相对较低的表面压力π≥23 mN/m时发生,这表明(PGMA14)(2-)PPO(34)既分配到LE域也分配到LC域。