McConaughy Shawn D, Kirkland Stacey E, Treat Nicolas J, Stroud Paul A, McCormick Charles L
Department of Polymer Science, The University of Southern Mississippi, Hattiesburg, Mississippi 39406, USA.
Biomacromolecules. 2008 Nov;9(11):3277-87. doi: 10.1021/bm8008457. Epub 2008 Oct 21.
Properties of Aloe vera galacturonate hydrogels formed via Ca(2+) crosslinking have been studied in regard to key parameters influencing gel formation including molecular weight, ionic strength, and molar ratio of Ca(2+) to COO(-) functionality. Dynamic oscillatory rheology and pulsed field gradient NMR (PFG-NMR) studies have been conducted on hydrogels formed at specified Ca(2+) concentrations in the presence and absence of Na(+) and K(+) ions in order to assess the feasibility of in situ gelation for controlled delivery of therapeutics. Aqueous Ca(2+) concentrations similar to those present in nasal and subcutaneous fluids induce the formation of elastic Aloe vera polysaccharide (AvP) hydrogel networks. By altering the ratio of Ca(2+) to COO (-) functionality, networks may be tailored to provide elastic modulus (G') values between 20 and 20000 Pa. The Aloe vera polysaccharide exhibits time-dependent phase separation in the presence of monovalent electrolytes. Thus the relative rates of calcium induced gelation and phase separation become major considerations when designing a system for in situ delivery applications where both monovalent (Na(+), K(+)) and divalent (Ca(2+)) ions are present. PFG-NMR and fluorescence microscopy confirm that distinctly different morphologies are present in gels formed in the presence and absence of 0.15 M NaCl. Curve fitting of theoretical models to experimental release profiles of fluorescein labeled dextrans indicate diffusion rates are related to hydrogel morphology. These studies suggest that for efficient in situ release of therapeutic agents, polymer concentrations should be maintained above the critical entanglement concentration ( Ce, 0.60 wt %) when [Ca(2+)]/[COO(-)] ratios are less than 1. Additionally, the monovalent electrolyte concentration in AvP solutions should not exceed 0.10 M prior to Ca(2+) crosslinking.
针对通过Ca(2+)交联形成的库拉索芦荟半乳糖醛酸盐水凝胶的特性,研究了影响凝胶形成的关键参数,包括分子量、离子强度以及Ca(2+)与COO(-)官能团的摩尔比。在存在和不存在Na(+)和K(+)离子的情况下,对在特定Ca(2+)浓度下形成的水凝胶进行了动态振荡流变学和脉冲场梯度核磁共振(PFG-NMR)研究,以评估原位凝胶化用于治疗剂控释的可行性。与鼻腔和皮下液中存在的Ca(2+)浓度相似的水溶液会诱导形成弹性的库拉索芦荟多糖(AvP)水凝胶网络。通过改变Ca(2+)与COO (-)官能团的比例,可以定制网络以提供20至20000 Pa之间的弹性模量(G')值。在单价电解质存在下,库拉索芦荟多糖表现出时间依赖性相分离。因此,在设计同时存在单价(Na(+)、K(+))和二价(Ca(2+))离子的原位递送应用系统时,钙诱导凝胶化和相分离的相对速率成为主要考虑因素。PFG-NMR和荧光显微镜证实,在存在和不存在0.15 M NaCl的情况下形成的凝胶中存在明显不同的形态。将理论模型与荧光素标记葡聚糖的实验释放曲线进行曲线拟合表明,扩散速率与水凝胶形态有关。这些研究表明,为了实现治疗剂的高效原位释放,当[Ca(2+)]/[COO(-)]比例小于1时,聚合物浓度应保持在临界缠结浓度(Ce,0.60 wt%)以上。此外,在Ca(2+)交联之前,AvP溶液中的单价电解质浓度不应超过0.10 M。