Suppr超能文献

通过同步加速器X射线散射和分子图形建模解析人及小鼠免疫球蛋白M的溶液结构。补体激活的一种可能机制。

Solution structure of human and mouse immunoglobulin M by synchrotron X-ray scattering and molecular graphics modelling. A possible mechanism for complement activation.

作者信息

Perkins S J, Nealis A S, Sutton B J, Feinstein A

机构信息

Department of Biochemistry and Chemistry, Royal Free Hospital School of Medicine, London, U.K.

出版信息

J Mol Biol. 1991 Oct 20;221(4):1345-66. doi: 10.1016/0022-2836(91)90937-2.

Abstract

The pentameric 71-domain structure of human and mouse immunoglobulin M (IgM) was investigated by synchrotron X-ray solution scattering and molecular graphics modelling. The radii of gyration RG of human IgM Quaife and its Fc5, IgM-S, Fab'2 and Fab fragments were determined as 12.2 nm, 6.1 nm, 6.1 nm, 4.9 nm and 2.9 nm in that order. The RG values were similar for mouse IgM P8 and its Fab'2 and Fab fragments, despite the presence of an additional carbohydrate site. The IgM scattering curves, to a nominal resolution of 5 nm, were compared with molecular graphics models based on published crystallographic alpha-carbon co-ordinates for the Fab and Fc structures of IgG. Good curve fits for Fab were obtained based on the crystal structure of Fab from IgG. A good curve fit was obtained for Fab'2, if the two Fab arms were positioned close together at their contact with the C mu 2 domains. The addition of the Fc fragment close to the C mu 2 domains of this Fab'2 model, to give a planar structure, accounted for the scattering curve of IgM-S. The Fc5 fragment was best modelled by a ring of five Fc monomers, constrained by packing considerations and disulphide bridge formation. A position for the J chain between two C mu 4 domains rather than at the centre of Fc5 was preferred. The intact IgM structure was best modelled using a planar arrangement of these Fab'2 and Fc5 models, with the side-to-side displacement of the Fab'2 arms in the plane of the IgM structure. All these models were consistent with hydrodynamic simulations of sedimentation data. The solution structure of IgM can therefore be reproduced quantitatively in terms of crystallographic structures for the fragments of IgG. Putative Clq binding sites have been identified on the C mu 3 domain. These would become accessible for interaction with Clq when the Fab'2 arms move out of the plane of the Fc5 disc in IgM, that is, a steric mechanism exposing pre-existing Clq sites. Comparison with a solution structure for Clq by neutron scattering shows that two or more of the six globular Clq heads in the hexameric head-and-stalk structure are readily able to make contacts with the putative Clq sites in the C mu 3 domains of free IgM if if the Clq arm-axis angle in solution is reduced from 40 degrees-45 degrees to 28 degrees. This could be the trigger for Cl activation.

摘要

通过同步加速器X射线溶液散射和分子图形建模研究了人和小鼠免疫球蛋白M(IgM)的五聚体71结构域结构。测定了人IgM Quaife及其Fc5、IgM-S、Fab'2和Fab片段的回转半径RG,依次为12.2nm、6.1nm、6.1nm、4.9nm和2.9nm。尽管存在一个额外的碳水化合物位点,但小鼠IgM P8及其Fab'2和Fab片段的RG值相似。将名义分辨率为5nm的IgM散射曲线与基于已发表的IgG Fab和Fc结构的晶体学α-碳坐标的分子图形模型进行比较。基于IgG Fab的晶体结构,Fab获得了良好的曲线拟合。如果两个Fab臂在与Cμ2结构域接触时靠得很近,则Fab'2获得了良好的曲线拟合。在该Fab'2模型的Cμ2结构域附近添加Fc片段以形成平面结构,解释了IgM-S的散射曲线。Fc5片段最好由五个Fc单体组成的环来建模,通过堆积考虑和二硫键形成来约束。J链在两个Cμ4结构域之间而不是在Fc5中心的位置更受青睐。完整的IgM结构最好使用这些Fab'2和Fc5模型的平面排列来建模,Fab'2臂在IgM结构平面内左右位移。所有这些模型都与沉降数据的流体动力学模拟一致。因此,IgM的溶液结构可以根据IgG片段的晶体学结构进行定量再现。在Cμ3结构域上已鉴定出推定的Clq结合位点。当Fab'2臂移出IgM中Fc5盘的平面时,这些位点将可用于与Clq相互作用,即一种空间机制暴露预先存在的Clq位点。与通过中子散射得到的Clq溶液结构的比较表明,如果溶液中Clq臂轴角从40度-45度减小到28度,六聚体头柄结构中的六个球形Clq头中的两个或更多个能够很容易地与游离IgM的Cμ3结构域中的推定Clq位点接触。这可能是Cl激活的触发因素。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验