Suppr超能文献

[肱骨近端固定角度钢板接骨术的生物力学研究]

[Biomechanical investigation of fixed-angle plate osteosynthesis of the proximal humerus].

作者信息

Röderer G, AbouElsoud M, Gebhard F, Claes L, Aschoff A J, Kinzl L

机构信息

Zentrum für Chirurgie, Klinik für Unfall-, Hand-, Plastische- und Wiederherstellungschirurgie, Universität Ulm, Steinhövelstr. 9, 89075, Ulm, Deutschland.

出版信息

Unfallchirurg. 2010 Feb;113(2):133-8. doi: 10.1007/s00113-009-1672-4.

Abstract

INTRODUCTION

Proximal humeral fractures are common in the elderly population and are often associated with osteoporosis. Fixation of unstable proximal humeral fractures is problematic due to loss of fixation in osteoporotic bone. Fixed-angle devices are intended to provide superior mechanical stability due to the principle of an internal fixator. The NCB(R)-PH (non-contact-bridging proximal humerus) plate is a new fixed-angle device that locks the screws to the plate by secondary insertion of a locking cap. The aim of this study was to investigate if and to what extent NCB-PH plates applied in the locked mode provide higher mechanical stability in a proximal humerus fracture model.

METHODS

For this investigation 16 (8 pairs) fresh frozen cadaveric humeri were used. An AO/ASIF 11-B 1 fracture of the proximal humerus was created in each bone and fixed with the NCB-PH plate. In a paired setting one bone was fixed with the plate in the locked mode and the other with the plate in the non-locked mode. The bones were then subjected to 100 cycles of axial loading and interfragmentary motion was measured. Bones surviving this test were subjected to load-to-failure testing and the force at which failure occurred was recorded.

RESULTS

Bones fixed with the plate in the locked mode showed a statistically significant lower (51%) interfragmentary rotation compared to bones fixed with the plate in the non-locked mode. There was also a tendency for the bones fixed with the plate in the locked mode to fail first under higher forces (16%) during load-to-failure testing.

CONCLUSION

The NCB-PH plate provides superior interfragmentary stability when used in the locked mode in a human cadaveric proximal humerus fracture model. Therefore, we recommend that all screws should be inserted in the locked mode. The results suggest that the NCB-PH plate in the locked mode provides higher primary postoperative stability thus permitting early functional treatment of the patient.

摘要

引言

肱骨近端骨折在老年人群中很常见,且常与骨质疏松症相关。由于骨质疏松性骨中固定的丧失,不稳定肱骨近端骨折的固定存在问题。由于内固定器的原理,角度固定装置旨在提供更好的机械稳定性。NCB(R)-PH(非接触桥接肱骨近端)钢板是一种新型角度固定装置,通过二次插入锁定帽将螺钉锁定在钢板上。本研究的目的是调查在锁定模式下应用的NCB-PH钢板在肱骨近端骨折模型中是否以及在何种程度上提供更高的机械稳定性。

方法

本研究使用了16具(8对)新鲜冷冻的尸体肱骨。在每根骨上制造一个AO/ASIF 11-B 1型肱骨近端骨折,并用NCB-PH钢板固定。在配对设置中,一根骨用锁定模式的钢板固定,另一根用非锁定模式的钢板固定。然后对这些骨进行100次轴向加载循环,并测量骨折块间的运动。通过该测试的骨进行破坏载荷测试,并记录发生破坏时的力。

结果

与用非锁定模式钢板固定的骨相比,用锁定模式钢板固定的骨在统计学上显示出显著更低(51%)的骨折块间旋转。在破坏载荷测试中,用锁定模式钢板固定的骨也有在更高力(16%)下先发生破坏的趋势。

结论

在人体尸体肱骨近端骨折模型中,NCB-PH钢板在锁定模式下使用时提供了更好的骨折块间稳定性。因此,我们建议所有螺钉都应在锁定模式下插入。结果表明,锁定模式下的NCB-PH钢板提供了更高的术后初期稳定性,从而允许对患者进行早期功能治疗。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验