An experimental model to investigate initial tracheal anastomosis strength.

OBJECTIVES/HYPOTHESIS: Early anastomotic dehiscence is a devastating complication of segmental tracheal resection. Although wound healing, patient comorbidities, and anastomotic tension are all influential factors, there is a paucity of information available on initial tracheal stability after various tracheal anastomosis techniques in human tissue.

STUDY DESIGN

Prospective cadaver study.

METHODS

We present a novel, inexpensive pulley-based system to apply symmetric tension on the trachea in a longitudinal direction to the point of anastomotic dehiscence. The validity of this mechanism was confirmed with trials using incrementally increasing quantities of the same suture type. Twenty-four trials were then performed on 12 cadaver tracheas (six fresh and six preserved) to compare anastomotic strength with two commonly used suture materials (3-0 polyglactin [Vicryl] vs. 3-0 polydioxanone [PDS]).

RESULTS

Validation studies demonstrated that the force increased appropriately with an increasing number of sutures tested. In the tracheal anastomoses, tracheal suture pull-through was the most common mechanism of dehiscence, regardless of suture type. No significant difference in anastomotic stability was detected between the fresh versus preserved cadaver tracheas. The mean anastomotic strength was slightly greater for Vicryl (179.9 N) when compared to PDS (161.5 N), but the difference did not reach significance (P = .207).

CONCLUSIONS

We introduce an inexpensive tool for measuring initial tracheal anastomosis stability with human cadavers, which demonstrated no difference in the tracheal pull-through strength of Vicryl and PDS.