Molecular Structure Analysis, German Cancer Research Center, Im Neuenheimer Feld 280, 69120, Heidelberg, Germany.
Amino Acids. 2011 Jul;41(2):311-20. doi: 10.1007/s00726-010-0647-7. Epub 2010 Jun 16.
It is hypothesized that metal ion-mediated adsorption of phosphorylated peptides on stationary phases of LC-columns is the major cause for their frequently observed poor detection efficiency in LC-MS. To study this phenomenon in more detail, sample solutions spiked with metal ion-mobilizing additives were analyzed by reversed phase μLC-ICP-MS or nanoLC-ESI-MS. Using μLC-ICP-MS, metal ions were analyzed directly as atomic ions. Using electrospray ionization, either metal ion chelates or phosphopeptide standard mixtures injected in subpicomole amounts were analyzed. Deferoxamine, imidazole, ascorbate, citrate, EDTA, and the tetrapeptide pSpSpSpS were tested as sample additives for the interlinked purposes of metal ion-mobilization and improvement of phosphopeptide recovery. Iron probably represents the major metal ion contamination of reversed phase columns. Based on the certified iron level in LC-grade solvents, a daily metal ion load of >10 pmol was estimated for typical nanoLC flow rates. In addition, phosphopeptide fractions from IMAC columns were identified as source for metal ion contamination of the LC column, as demonstrated for Ga(3+)-IMAC. The three metal ion-chelating additives, EDTA, citrate and pSpSpSpS, were found to perform best for improving the LC recovery of multiply phosphorylated peptides injected at subpicomole amounts. The benefits of metal ion-mobilizing LC (mimLC) characterized by metal ion complexing sample additives is demonstrated for three different instrumental setups comprising (a) a nanoUPLC-system with direct injection on the analytical column, (b) a nanoLC system with inclusion of a trapping column, and (c) the use of a HPLC-Chip system with integrated trapping and analytical column.
据推测,金属离子介导的磷酸化肽在 LC 柱固定相上的吸附是导致其在 LC-MS 中经常观察到的低检测效率的主要原因。为了更详细地研究这一现象,用含有金属离子螯合添加剂的样品溶液通过反相μLC-ICP-MS 或纳升 LC-ESI-MS 进行分析。用 μLC-ICP-MS 可直接分析金属离子作为原子离子。用电喷雾电离,以亚皮摩尔量注入的金属离子螯合物或磷酸肽标准混合物可进行分析。作为将金属离子螯合和提高磷酸肽回收率相结合的目的,测试了去铁胺、咪唑、抗坏血酸、柠檬酸盐、EDTA 和四肽 pSpSpSpS 作为样品添加剂。基于 LC 级溶剂中认证的铁含量,估计典型纳升 LC 流速下的每日金属离子负荷>10 pmol。此外,如 Ga(3+)-IMAC 所示,IMAC 柱上的磷酸肽馏分被鉴定为 LC 柱金属离子污染的来源。三种金属离子螯合添加剂,EDTA、柠檬酸盐和 pSpSpSpS,被发现对提高亚皮摩尔量注入的多磷酸化肽的 LC 回收率效果最佳。通过三种不同的仪器设置,包括(a)直接在分析柱上进样的纳升 UPLC 系统,(b)包含捕集柱的纳升 LC 系统,和(c)使用集成捕集和分析柱的 HPLC-Chip 系统,对具有金属离子螯合样品添加剂的金属离子促进型 LC(mimLC)的特点进行了描述。