Suppr超能文献

对由n型氧化锌和p型硅纳米线构成的发光二极管中的光发射进行的研究。

Investigation on light emission in light-emitting diodes constructed with n-ZnO and p-Si nanowires.

作者信息

Kim Kwangeun, Moon Taeho, Kim Sangsig

机构信息

Department of Electrical Engineering, Korea University, Seoul 136-713, Republic of Korea.

出版信息

J Nanosci Nanotechnol. 2011 Jul;11(7):6025-8. doi: 10.1166/jnn.2011.4345.

Abstract

The light emission was investigated in light-emitting diodes (LEDs) constructed with n-ZnO and p-Si nanowires (NWs). ZnO NWs were synthesized by thermal chemical vapor deposition and Si NWs were formed by crystallographic wet etching of a Si wafer. The LEDs were fabricated using the NWs via dielectrophoresis (DEP) and direct transfer methods. The DEP method enabled to align the ZnO NW at the position that led to p-n heterojunction diodes by crossing with the transferred Si NW. The I-V curve of the p-n heterojunction diode showed the well-defined current-rectifying characteristic, with a turn-on voltage of 3 V. The electroluminescence spectrum in the dark showed the strong emission at approximately 385 nm and the broad emission centered at approximately 510 nm, at a forward bias of 30 V. Under the illumination of 325-nm-wavelength light, the luminescence intensity at 385 nm was dramatically enhanced, compared to that in the dark, probably due to the electric-field-induced enhancement of luminescence.

摘要

对采用n型氧化锌(n-ZnO)和p型硅(p-Si)纳米线(NWs)构建的发光二极管(LED)中的光发射进行了研究。氧化锌纳米线通过热化学气相沉积法合成,硅纳米线通过对硅片进行晶体湿法蚀刻形成。通过介电泳(DEP)和直接转移方法,利用这些纳米线制造了发光二极管。介电泳方法能够将氧化锌纳米线排列在与转移的硅纳米线交叉从而形成p-n异质结二极管的位置。p-n异质结二极管的I-V曲线显示出明确的电流整流特性,开启电压为3V。在30V正向偏压下,黑暗中的电致发光光谱在约385nm处显示出强发射,在约510nm处有一个以其为中心的宽发射。在325nm波长光的照射下,与黑暗中相比,385nm处的发光强度显著增强,这可能是由于电场诱导的发光增强。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验