Department of Biomedical Engineering, School of Medicine, Pusan National University, Yangsan, Korea.
Korean J Pain. 2012 Apr;25(2):81-8. doi: 10.3344/kjp.2012.25.2.81. Epub 2012 Apr 4.
In discography performed during percutaneous endoscopic lumbar discectomy (PELD) via the posterolateral approach, it is difficult to create a fluoroscopic tunnel view because a long needle is required for discography and the guide-wire used for consecutive PELD interrupts rotation of fluoroscope. A stereotactic system was designed to facilitate the determination of the needle entry point, and the feasibility of this system was evaluated during interventional spine procedures.
A newly designed stereotactic guidance system underwent a field test application for PELD. Sixty patients who underwent single-level PELD at L4-L5 were randomly divided into conventional or stereotactic groups. PELD was performed via the posterolateral approach using the entry point on the skin determined by premeasured distance from the midline and angles according to preoperative magnetic resonance imaging (MRI) findings. Needle entry accuracy provided by the two groups was determined by comparing the distance and angle measured by postoperative computed tomography with those measured by preoperative MRI. The duration and radiation exposure for determining the entry point were measured in the groups.
The new stereotactic guidance system and the conventional method provided similarly accurate entry points for discography and consecutive PELD. However, the new stereotactic guidance system lowered the duration and radiation exposure for determining the entry point.
The new stereotactic guidance system under fluoroscopy provided a reliable needle entry point for discography and consecutive PELD. Furthermore, it reduced the duration and radiation exposure associated with determining needle entry.
在经皮内窥镜腰椎间盘切除术(PELD)经后外侧入路进行椎间盘造影时,由于椎间盘造影需要使用长针,且用于连续 PELD 的导丝会中断透视仪的旋转,因此很难创建透视隧道视图。设计了一种立体定向系统来辅助确定进针点,该系统在介入脊柱手术中评估了其可行性。
一种新设计的立体定向引导系统在 PELD 中进行了现场测试应用。60 例接受 L4-L5 单节段 PELD 的患者随机分为常规组或立体定向组。采用经皮内窥镜腰椎间盘切除术经后外侧入路,进针点根据术前磁共振成像(MRI)测量的中线距离和角度确定。通过比较术后 CT 测量的距离和角度与术前 MRI 测量的距离和角度,确定两组的进针准确性。测量两组确定进针点的时间和辐射暴露。
新的立体定向引导系统和常规方法为椎间盘造影和连续 PELD 提供了类似准确的进针点。然而,新的立体定向引导系统降低了确定进针点的时间和辐射暴露。
在透视引导下,新的立体定向引导系统为椎间盘造影和连续 PELD 提供了可靠的进针点。此外,它还减少了与确定进针相关的时间和辐射暴露。