Suppr超能文献

甘油或碳酸甘油酯与尿素催化合成羟甲基-2-恶唑烷酮。

Catalytic synthesis of hydroxymethyl-2-oxazolidinones from glycerol or glycerol carbonate and urea.

机构信息

Department of Chemistry and CIRCC, University of Bari, Campus Universitario, via Orabona 4, 70126 Bari, Italy.

出版信息

ChemSusChem. 2013 Feb;6(2):345-52. doi: 10.1002/cssc.201200524. Epub 2012 Dec 7.

Abstract

Oxazolidinones have been synthesized by reacting glycerol carbonate or glycerol with urea in the presence of γ-Zr phosphate as a catalyst. The conversion yield of the polyol or its carbonate depends on the temperature. Below 408 K the selectivity is 100 % with a conversion of up to 25 %, whereas increasing the temperature means that conversion yield grows, but the selectivity decreases, which makes the separation process more difficult. Starting from glycerol carbonate, two isomers, 6 and 6', are formed with a quasi 1:1 molar ratio because urea can attack the carbonate moiety on both sides of the carboxylic CO moiety. From glycerol the formation of the 6' isomer is preferred: the ratio of 6'/6 is close to 7. The oxazolidinones formed act as templates because they interact through hydrogen bonding with glycerol. The intensity of the interaction depends on the 6 or 6' isomer: DFT calculations showed that the energy was 22.6 kcal mol(-1) for 6-oxazolidinone and 25.7 kcal mol(-1) for 6'-oxazolidinone.

摘要

唑烷酮类化合物是由甘油碳酸酯或甘油与尿素在γ-Zr 磷酸盐作为催化剂的存在下反应合成的。多元醇或其碳酸酯的转化率取决于温度。在 408 K 以下,选择性为 100%,转化率高达 25%,而升高温度意味着转化率增加,但选择性降低,这使得分离过程更加困难。从甘油碳酸酯出发,由于尿素可以攻击羧酸 CO 部分两侧的碳酸酯部分,因此形成了两种异构体 6 和 6',摩尔比近乎 1:1。从甘油形成 6'异构体是首选的:6'/6 的比例接近 7。形成的唑烷酮类化合物作为模板,因为它们通过氢键与甘油相互作用。相互作用的强度取决于 6 或 6'异构体:DFT 计算表明,6-唑烷酮的能量为 22.6 kcal mol(-1),而 6'-唑烷酮的能量为 25.7 kcal mol(-1)。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验