Institute for Micro- and Nanomaterials, Ulm University, Albert-Einstein-Allee 47, 89081 Ulm,Germany.
Beilstein J Nanotechnol. 2013 May 14;4:306-17. doi: 10.3762/bjnano.4.34. Print 2013.
One of the big challenges of the 21st century is the utilization of nanotechnology for energy technology. Nanoscale structures may provide novel functionality, which has been demonstrated most convincingly by successful applications such as dye-sensitized solar cells introduced by M. Grätzel. Applications in energy technology are based on the transfer and conversion of energy. Following the example of photosynthesis, this requires a combination of light harvesting, transfer of energy to a reaction center, and conversion to other forms of energy by charge separation and transfer. This may be achieved by utilizing hybrid nanostructures, which combine metallic and nonmetallic components. Metallic nanostructures can interact strongly with light. Plasmonic excitations of such structures can cause local enhancement of the electrical field, which has been utilized in spectroscopy for many years. On the other hand, the excited states in metallic structures decay over very short lifetimes. Longer lifetimes of excited states occur in nonmetallic nanostructures, which makes them attractive for further energy transfer before recombination or relaxation sets in. Therefore, the combination of metallic nanostructures with nonmetallic materials is of great interest. We report investigations of hybrid nanostructured model systems that consist of a combination of metallic nanoantennas (fabricated by nanosphere lithography, NSL) and oxide nanoparticles. The oxide particles were doped with rare-earth (RE) ions, which show a large shift between absorption and emission wavelengths, allowing us to investigate the energy-transfer processes in detail. The main focus is on TiO2 nanoparticles doped with Eu(3+), since the material is interesting for applications such as the generation of hydrogen by photocatalytic splitting of water molecules. We use high-resolution techniques such as confocal fluorescence microscopy for the investigation of energy-transfer processes. The experiments are supported by simulations of the electromagnetic field enhancement in the vicinity of well-defined nanoantennas. The results show that the presence of the nanoparticle layer can modify the field enhancement significantly. In addition, we find that the fluorescent intensities observed in the experiments are affected by agglomeration of the nanoparticles. In order to further elucidate the possible influence of agglomeration and quenching effects in the vicinity of the nanoantennas, we have used a commercial organic pigment containing Eu, which exhibits an extremely narrow particle size distribution and no significant agglomeration. We demonstrate that quenching of the Eu fluorescence can be suppressed by covering the nanoantennas with a 10 nm thick SiO x layer.
二十一世纪的一大挑战是利用纳米技术进行能源技术。纳米结构可能提供新颖的功能,这已被成功应用如染料敏化太阳能电池的 M. Grätzel 等证明。能源技术中的应用基于能量的转移和转换。效仿光合作用,这需要光的收集、能量转移到反应中心,以及通过电荷分离和转移转化为其他形式的能量。这可以通过利用结合金属和非金属成分的混合纳米结构来实现。金属纳米结构可以与光强烈相互作用。这些结构的等离子体激元激发可以导致局部电场增强,这在光谱学中已经使用了多年。另一方面,金属结构中的激发态寿命非常短。在非金属纳米结构中,激发态的寿命更长,这使得它们在重组或弛豫发生之前,对于进一步的能量转移很有吸引力。因此,金属纳米结构与非金属材料的结合具有很大的兴趣。我们报告了由金属纳米天线(通过纳米球光刻法,NSL 制造)和氧化物纳米粒子组成的混合纳米结构模型系统的研究。氧化物颗粒掺杂了稀土(RE)离子,它们的吸收和发射波长之间有很大的偏移,使我们能够详细研究能量转移过程。重点是掺杂 Eu(3+)的 TiO2 纳米粒子,因为该材料对于通过光催化分解水分子产生氢气等应用很感兴趣。我们使用高分辨率技术,如共聚焦荧光显微镜,来研究能量转移过程。实验得到了在明确定义的纳米天线附近的电磁场增强模拟的支持。结果表明,纳米颗粒层的存在可以显著改变场增强。此外,我们发现实验中观察到的荧光强度受到纳米颗粒团聚的影响。为了进一步阐明纳米天线附近团聚和猝灭效应的可能影响,我们使用了一种含有 Eu 的商业有机颜料,该颜料表现出极其窄的粒径分布,没有明显的团聚。我们证明,通过用 10nm 厚的 SiO x 层覆盖纳米天线,可以抑制 Eu 荧光的猝灭。