Monterosso Cristina, Galan Alessandro, Böhm Elisabetta, Zampini Alfonso, Parekh Mohit, Caretti Luigi
Department of Ophthalmology, Dell'Angelo Hospital, Mestre, 30174 Venice, Italy.
Department of Ophthalmology, S. Antonio Hospital, S. Paolo Centre, Padua, 35127 Venice, Italy.
ISRN Ophthalmol. 2013 Aug 29;2013:971451. doi: 10.1155/2013/971451. eCollection 2013.
Purpose. To compare the effect of 60 kHz and 150 kHz femtosecond (FS) laser on the corneal stromal bed surfaces (SBS). Methods. Sixteen human donor corneal tissues unsuitable for transplantation were used. Anterior and posterior lamella was obtained using 60 kHz and 150 kHz FS laser. A standard depth of 400 μ m was set for anterior lamellar keratoplasty (ALK) and endothelial lamellar keratoplasty (ELK). The quality and smoothness of the SBS post-FS laser dissection were graded for statistics. Results. No intraoperative complications were found. The side cuts were straight, and the SBS appeared smoother in cuts obtained using 150 kHz. The average values of the SBS quality of the anterior lamellar cut were found to be 2.25 (±0.28) for 60 kHz and 3.125 (±0.25) for 150 kHz (P = 0.0039). Whereas, 2 (±0.4) for 60 kHz and 2.75 (±0.28) for 150 kHz (P = 0.0273) was the quality observed in endothelial cuts. No significant difference was found between anterior and posterior cuts performed using the same FS laser (60 kHz or 150 kHz) (P > 0.05). Conclusions. The 60 kHz and 150 kHz FS lasers are equally effective in performing lamellar dissection for ALK and ELK. 150 kHz FS laser allows a tighter spot and layer separation which creates a slightly smoother SBS.
目的。比较60千赫兹和150千赫兹飞秒(FS)激光对角膜基质床表面(SBS)的影响。方法。使用16个不适用于移植的人类供体角膜组织。使用60千赫兹和150千赫兹FS激光获取前层和后层。为前板层角膜移植术(ALK)和内皮板层角膜移植术(ELK)设定400微米的标准深度。对FS激光切割后SBS的质量和平滑度进行分级统计。结果。未发现术中并发症。侧切笔直,使用150千赫兹获得的切割中SBS显得更平滑。发现60千赫兹前层切割的SBS质量平均值为2.25(±0.28),150千赫兹为3.125(±0.25)(P = 0.0039)。而在内皮层切割中观察到的质量,60千赫兹为2(±0.4),150千赫兹为2.75(±0.28)(P = 0.0273)。使用相同FS激光(60千赫兹或150千赫兹)进行的前切和后切之间未发现显著差异(P > 0.05)。结论。60千赫兹和150千赫兹FS激光在进行ALK和ELK的板层切割方面同样有效。150千赫兹FS激光允许更紧密的光斑和层分离,从而产生稍平滑的SBS。