Yan Qi-Long, Zeman Svatopluk, Zhang Jian-Guo, He Piao, Musil Tomáš, Bartošková Monika
Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, 53210 Pardubice, Czech Republic.
Phys Chem Chem Phys. 2014 Nov 28;16(44):24282-91. doi: 10.1039/c4cp03479a.
The thermal behavior, decomposition kinetics and mechanisms of 1-amino-1-(tetrazol-5-yldiazenyl) guanidine (tetrazene) and 2-(tetrazol-5-yldiazenyl) guanidine (MTX-1) have been investigated using DSC, TG techniques, and quantum chemical calculations. It has been found that MTX-1 is much more stable than tetrazene and MTX-1, and both of them decompose in three steps with different kinetic parameters. Tetrazene is melted-dehydrated at 128.4 °C with a heat absorption of 50 J g(-1) and then it starts to decompose at around 118.6 °C with a peak temperature of 126.3 °C covered by a heat release of 1037 J g(-1) at a heating rate of 1.0 °C min(-1), while MTX-1 starts at 167.7 °C with a main peak of 191.1 °C covered by a heat change of 1829 J g(-1) under the same conditions. The activation energy is almost the same for their first decomposition steps (225 kJ mol(-1)), which are controlled by a three dimensional nucleation and growth model (A3). The mechanisms of the rate-limiting steps are supported by quantum chemical calculations. They could undergo a similar rate-limiting chemical process producing 1H-tetrazole and N2 for both cases, while the former also produces aminocyanamide and the latter produces cyanamide.
采用差示扫描量热法(DSC)、热重分析法(TG)以及量子化学计算方法,对1-氨基-1-(四唑-5-基二氮烯基)胍(四氮烯)和2-(四唑-5-基二氮烯基)胍(MTX-1)的热行为、分解动力学及机理进行了研究。结果发现,MTX-1比四氮烯稳定得多,二者均分三步分解,且具有不同的动力学参数。四氮烯在128.4℃熔化脱水,吸热50 J g⁻¹,然后在118.6℃左右开始分解,在1.0℃ min⁻¹的升温速率下,峰值温度为126.3℃,放热1037 J g⁻¹;而MTX-1在相同条件下于167.7℃开始分解,主峰为191.1℃,热变化为1829 J g⁻¹。它们第一步分解的活化能几乎相同(225 kJ mol⁻¹),均受三维成核生长模型(A3)控制。量子化学计算支持了限速步骤的机理。两种情况下,它们可能经历类似的限速化学过程生成1H-四唑和N₂,而前者还生成氨基氰胺,后者生成氰胺。