Suppr超能文献

[一种提高太赫兹时域光谱系统成像空间分辨率的有效方法]

[An effective method for improving the imaging spatial resolution of terahertz time domain spectroscopy system].

作者信息

Zhang Zeng-yan, Ji Te, Zhu Zhi-yong, Zhao Hong-wei, Chen Min, Xiao Ti-qiao, Guo Zhi

出版信息

Guang Pu Xue Yu Guang Pu Fen Xi. 2015 Jan;35(1):1-4.

Abstract

Terahertz radiation is an electromagnetic radiation in the range between millimeter waves and far infrared. Due to its low energy and non-ionizing characters, THz pulse imaging emerges as a novel tool in many fields, such as material, chemical, biological medicine, and food safety. Limited spatial resolution is a significant restricting factor of terahertz imaging technology. Near field imaging method was proposed to improve the spatial resolution of terahertz system. Submillimeter scale's spauial resolution can be achieved if the income source size is smaller than the wawelength of the incoming source and the source is very close to the sample. But many changes were needed to the traditional terahertz time domain spectroscopy system, and it's very complex to analyze sample's physical parameters through the terahertz signal. A method of inserting a pinhole upstream to the sample was first proposed in this article to improve the spatial resolution of traditional terahertz time domain spectroscopy system. The measured spatial resolution of terahertz time domain spectroscopy system by knife edge method can achieve spatial resolution curves. The moving stage distance between 10 % and 90 Yo of the maximum signals respectively was defined as the, spatial resolution of the system. Imaging spatial resolution of traditional terahertz time domain spectroscopy system was improved dramatically after inserted a pinhole with diameter 0. 5 mm, 2 mm upstream to the sample. Experimental results show that the spatial resolution has been improved from 1. 276 mm to 0. 774 mm, with the increment about 39 %. Though this simple method, the spatial resolution of traditional terahertz time domain spectroscopy system was increased from millimeter scale to submillimeter scale. A pinhole with diameter 1 mm on a polyethylene plate was taken as sample, to terahertz imaging study. The traditional terahertz time domain spectroscopy system and pinhole inserted terahertz time domain spectroscopy system were applied in the imaging experiment respectively. The relative THz-power loss imaging of samples were use in this article. This method generally delivers the best signal to noise ratio in loss images, dispersion effects are cancelled. Terahertz imaging results show that the sample's boundary was more distinct after inserting the pinhole in front of, sample. The results also conform that inserting pinhole in front of sample can improve the imaging spatial resolution effectively. The theoretical analyses of the method which improve the spatial resolution by inserting a pinhole in front of sample were given in this article. The analyses also indicate that the smaller the pinhole size, the longer spatial coherence length of the system, the better spatial resolution of the system. At the same time the terahertz signal will be reduced accordingly. All the experimental results and theoretical analyses indicate that the method of inserting a pinhole in front of sample can improve the spatial resolution of traditional terahertz time domain spectroscopy system effectively, and it will further expand the application of terahertz imaging technology.

摘要

太赫兹辐射是介于毫米波和远红外之间的一种电磁辐射。由于其低能量和非电离特性,太赫兹脉冲成像在材料、化学、生物医药和食品安全等许多领域成为一种新型工具。有限的空间分辨率是太赫兹成像技术的一个重要限制因素。为提高太赫兹系统的空间分辨率,提出了近场成像方法。如果入射源尺寸小于入射源波长且源非常靠近样品,则可实现亚毫米尺度的空间分辨率。但传统太赫兹时域光谱系统需要进行许多改变,并且通过太赫兹信号分析样品的物理参数非常复杂。本文首次提出在样品上游插入针孔的方法来提高传统太赫兹时域光谱系统的空间分辨率。用刀口法测量太赫兹时域光谱系统的空间分辨率可得到空间分辨率曲线。将最大信号的10%至90%之间的移动台距离分别定义为系统的空间分辨率。在样品上游插入直径为0.5毫米、2毫米的针孔后,传统太赫兹时域光谱系统的成像空间分辨率得到了显著提高。实验结果表明,空间分辨率从1.276毫米提高到了0.774毫米,提高了约39%。通过这种简单的方法,传统太赫兹时域光谱系统的空间分辨率从毫米尺度提高到了亚毫米尺度。以聚乙烯板上直径为1毫米的针孔作为样品进行太赫兹成像研究。分别将传统太赫兹时域光谱系统和插入针孔的太赫兹时域光谱系统应用于成像实验。本文采用样品的相对太赫兹功率损耗成像。该方法通常在损耗图像中提供最佳的信噪比,色散效应被消除。太赫兹成像结果表明,在样品前插入针孔后,样品的边界更加清晰。结果还证实,在样品前插入针孔可有效提高成像空间分辨率。本文对在样品前插入针孔提高空间分辨率的方法进行了理论分析。分析还表明,针孔尺寸越小,系统的空间相干长度越长,系统的空间分辨率越好。同时太赫兹信号将相应降低。所有实验结果和理论分析表明,在样品前插入针孔的方法可有效提高传统太赫兹时域光谱系统的空间分辨率,并将进一步拓展太赫兹成像技术的应用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验