Suppr超能文献

用于永久性植入近距离放射治疗蒙特卡罗剂量计算的虚拟患者模型的开发:CT图像伪影减轻与组织分配的相互依存关系

Development of virtual patient models for permanent implant brachytherapy Monte Carlo dose calculations: interdependence of CT image artifact mitigation and tissue assignment.

作者信息

Miksys N, Xu C, Beaulieu L, Thomson R M

机构信息

Carleton Laboratory for Radiotherapy Physics, Department of Physics, Carleton University, Ottawa, ON.

出版信息

Phys Med Biol. 2015 Aug 7;60(15):6039-62. doi: 10.1088/0031-9155/60/15/6039. Epub 2015 Jul 28.

Abstract

This work investigates and compares CT image metallic artifact reduction (MAR) methods and tissue assignment schemes (TAS) for the development of virtual patient models for permanent implant brachytherapy Monte Carlo (MC) dose calculations. Four MAR techniques are investigated to mitigate seed artifacts from post-implant CT images of a homogeneous phantom and eight prostate patients: a raw sinogram approach using the original CT scanner data and three methods (simple threshold replacement (STR), 3D median filter, and virtual sinogram) requiring only the reconstructed CT image. Virtual patient models are developed using six TAS ranging from the AAPM-ESTRO-ABG TG-186 basic approach of assigning uniform density tissues (resulting in a model not dependent on MAR) to more complex models assigning prostate, calcification, and mixtures of prostate and calcification using CT-derived densities. The EGSnrc user-code BrachyDose is employed to calculate dose distributions. All four MAR methods eliminate bright seed spot artifacts, and the image-based methods provide comparable mitigation of artifacts compared with the raw sinogram approach. However, each MAR technique has limitations: STR is unable to mitigate low CT number artifacts, the median filter blurs the image which challenges the preservation of tissue heterogeneities, and both sinogram approaches introduce new streaks. Large local dose differences are generally due to differences in voxel tissue-type rather than mass density. The largest differences in target dose metrics (D90, V100, V150), over 50% lower compared to the other models, are when uncorrected CT images are used with TAS that consider calcifications. Metrics found using models which include calcifications are generally a few percent lower than prostate-only models. Generally, metrics from any MAR method and any TAS which considers calcifications agree within 6%. Overall, the studied MAR methods and TAS show promise for further retrospective MC dose calculation studies for various permanent implant brachytherapy treatments.

摘要

本研究针对永久性植入近距离放射治疗的蒙特卡罗(MC)剂量计算虚拟患者模型的开发,对CT图像金属伪影减少(MAR)方法和组织赋值方案(TAS)进行了研究和比较。研究了四种MAR技术,以减轻均匀体模和八名前列腺癌患者植入后CT图像中的种子伪影:一种使用原始CT扫描仪数据的原始正弦图方法,以及三种仅需要重建CT图像的方法(简单阈值替换(STR)、3D中值滤波器和虚拟正弦图)。使用六种TAS开发虚拟患者模型,范围从AAPM-ESTRO-ABG TG-186分配均匀密度组织的基本方法(产生不依赖于MAR的模型)到使用CT衍生密度分配前列腺、钙化以及前列腺和钙化混合物的更复杂模型。采用EGSnrc用户代码BrachyDose计算剂量分布。所有四种MAR方法都消除了明亮的种子点伪影,与原始正弦图方法相比,基于图像的方法在减轻伪影方面效果相当。然而,每种MAR技术都有局限性:STR无法减轻低CT值伪影,中值滤波器会模糊图像,这对组织异质性的保留提出了挑战,并且两种正弦图方法都会引入新的条纹。较大的局部剂量差异通常是由于体素组织类型的差异而非质量密度。与其他模型相比,目标剂量指标(D90、V100、V150)的最大差异超过50%,是在未校正的CT图像与考虑钙化的TAS一起使用时出现的。使用包含钙化的模型得出的指标通常比仅包含前列腺的模型低几个百分点。一般来说,来自任何MAR方法和任何考虑钙化的TAS的指标在6%以内一致。总体而言,所研究的MAR方法和TAS对于各种永久性植入近距离放射治疗的进一步回顾性MC剂量计算研究具有前景。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验