Department of Mechanical, Materials and Manufacturing, University of Nottingham, Nottingham, UK.
School of Process Environmental and Materials Science, University of Leeds, Leeds, UK.
Adv Colloid Interface Sci. 2015 Nov;225:1-15. doi: 10.1016/j.cis.2015.07.006. Epub 2015 Aug 1.
Bubbles are fundamental to our daily life and have wide applications such as in the chemical and petrochemical industry, pharmaceutical engineering, mineral processing and colloids engineering. This paper reviews the existing theoretical and experimental bubble studies, with a special focus on the dynamics of triple line and the influence of nanoparticles on the bubble growth and departure process. Nanoparticles are found to influence significantly the effective interfacial properties and the dynamics of triple line, whose effects are dependent on the particle morphology and their interaction with the substrate. While the Young-Laplace equation is widely applied to predict the bubble shape, its application is limited under highly non-equilibrium conditions. Using gold nanoparticle as an example, new experimental study is conducted to reveal the particle concentration influence on the behaviour of triple line and bubble dynamics. A new method is developed to predict the bubble shape when the interfacial equilibrium conditions cannot be met, such as during the oscillation period. The method is used to calculate the pressure difference between the gas and liquid phases, which is shown to oscillate across the liquid-gas interface and is responsible for the interface fluctuation. The comparison of the theoretical study with the experimental data shows a very good agreement, which suggests its potential application to predict bubble shape during non-equilibrium conditions.
气泡在我们的日常生活中起着至关重要的作用,并且在化学和石油化工、制药工程、矿物加工和胶体工程等领域有着广泛的应用。本文综述了现有的关于气泡的理论和实验研究,特别关注了三线动力学以及纳米颗粒对气泡生长和脱离过程的影响。研究发现,纳米颗粒显著影响有效界面特性和三线动力学,其影响取决于颗粒形态及其与基底的相互作用。虽然杨氏拉普拉斯方程广泛应用于预测气泡形状,但在高度非平衡条件下其应用受到限制。本文以金纳米颗粒为例,进行了新的实验研究,揭示了颗粒浓度对三线和气泡动力学行为的影响。开发了一种新的方法来预测当界面平衡条件无法满足时的气泡形状,例如在振荡期间。该方法用于计算气相和液相之间的压差,结果表明压差在气-液界面上振荡,是导致界面波动的原因。理论研究与实验数据的比较表明,两者吻合得非常好,这表明该方法可能适用于预测非平衡条件下的气泡形状。