Oh Daniel S, Koch Alia, Eisig Sidney, Kim Sahng Gyoon, Kim Yoon Hyuk, Kim Do-Gyoon, Shim Jae Hyuck
Oral and Maxillofacial Surgery, Columbia University;
Oral and Maxillofacial Surgery, Columbia University.
J Vis Exp. 2015 Sep 11(103):52947. doi: 10.3791/52947.
Without an active, thriving cell population that is well-distributed and stably anchored to the inserted template, exceptional bone regeneration does not occur. With conventional templates, the absence of internal micro-channels results in the lack of cell infiltration, distribution, and inhabitance deep inside the templates. Hence, a highly porous and uniformly interconnected trabecular-bone-like template with micro-channels (biogenic microenvironment template; BMT) has been developed to address these obstacles. The novel BMT was created by innovative concepts (capillary action) and fabricated with a sponge-template coating technique. The BMT consists of several structural components: inter-connected primary-pores (300-400 µm) that mimic pores in trabecular bone, micro-channels (25-70 µm) within each trabecula, and nanopores (100-400 nm) on the surface to allow cells to anchor. Moreover, the BMT has been documented by mechanical test study to have similar mechanical strength properties to those of human trabecular bone (~3.8 MPa)12. The BMT exhibited high absorption, retention, and habitation of cells throughout the bridge-shaped (Π) templates (3 cm height and 4 cm length). The cells that were initially seeded into one end of the templates immediately mobilized to the other end (10 cm distance) by capillary action of the BMT on the cell media. After 4 hr, the cells homogenously occupied the entire BMT and exhibited normal cellular behavior. The capillary action accounted for the infiltration of the cells suspended in the media and the distribution (active migration) throughout the BMT. Having observed these capabilities of the BMT, we project that BMTs will absorb bone marrow cells, growth factors, and nutrients from the periphery under physiological conditions. The BMT may resolve current limitations via rapid infiltration, homogenous distribution and inhabitance of cells in large, volumetric templates to repair massive skeletal defects.
如果没有活跃、旺盛且分布良好并稳定锚定在植入模板上的细胞群体,就不会发生卓越的骨再生。对于传统模板,由于缺乏内部微通道,导致模板内部深处缺乏细胞浸润、分布和栖息。因此,已开发出一种具有微通道的高度多孔且均匀互连的小梁骨样模板(生物微环境模板;BMT)来克服这些障碍。这种新型BMT是通过创新概念(毛细作用)创建的,并采用海绵模板涂层技术制造。BMT由几个结构组件组成:相互连接的初级孔隙(300 - 400 µm),模拟小梁骨中的孔隙;每个小梁内的微通道(25 - 70 µm);以及表面的纳米孔(100 - 400 nm),以允许细胞锚定。此外,机械测试研究表明BMT具有与人类小梁骨相似的机械强度特性(约3.8 MPa)。BMT在整个桥形(Π形)模板(高3 cm,长4 cm)中表现出对细胞的高吸收、保留和栖息能力。最初接种到模板一端的细胞通过BMT对细胞培养基的毛细作用立即迁移到另一端(距离10 cm)。4小时后,细胞均匀地占据了整个BMT并表现出正常的细胞行为。毛细作用导致悬浮在培养基中的细胞浸润并在整个BMT中分布(主动迁移)。观察到BMT的这些能力后,我们推测在生理条件下,BMT将从周围吸收骨髓细胞、生长因子和营养物质。BMT可能通过在大型、大容量模板中快速浸润、均匀分布和细胞栖息来解决当前的局限性,以修复大面积的骨骼缺损。