Suppr超能文献

关节镜下Latarjet手术的解剖学基础:一项尸体研究

The Anatomic Basis for the Arthroscopic Latarjet Procedure: A Cadaveric Study.

作者信息

Hawi Nael, Reinhold Aja, Suero Eduardo M, Liodakis Emmanouil, Przyklenk Sandra, Brandes Julia, Schmiedl Andreas, Krettek Christian, Meller Rupert

机构信息

Trauma Department, Hannover Medical School, Hannover, Germany

Trauma Department, Hannover Medical School, Hannover, Germany.

出版信息

Am J Sports Med. 2016 Feb;44(2):497-503. doi: 10.1177/0363546515614320. Epub 2015 Dec 9.

Abstract

BACKGROUND

The Latarjet technique is a reliable treatment option for recurrent anterior shoulder instability. However, the complication rate has been reported to be as high as 30%, with 1.6% of patients suffering a nerve injury. The all-arthroscopic Latarjet procedure has been gaining popularity, even as it has introduced its own challenges. Given that the surgeon is not able to palpate the nerves, their localization and protection can be difficult. Additionally, the use of different instruments can lead to distinct nerve injury mechanisms.

PURPOSE

To describe the anatomic trajectory of the musculocutaneous, axillary, and suprascapular nerves in relation to the arthroscopic Latarjet approach. Using this information, guidance is provided for reducing nerve injuries during instrumentation and screw insertion.

STUDY DESIGN

Descriptive laboratory study.

METHODS

A total of 50 cadaveric shoulders from 25 whole-body specimens were examined. The specimens were placed in the beach-chair position, and the deltopectoral and dorsal approaches were used to expose the relevant structures. A subscapularis muscle split was performed between the inferior and middle thirds of the tendon. Digital caliper measurements were taken between various points of the trajectories of the nerves and surrounding anatomic landmarks. The location of the nerves relative to the split was recorded.

RESULTS

The musculocutaneous nerve lay within the split in 66% of the shoulders (n = 33); it was medial to the split in 28% (n = 14); it was found lateral to split in 2% (n = 1); and it was not identified in 4% of shoulders (n = 2). The mean length of the axillary nerve was 4.0 cm (95% CI, 3.7-4.2) from the exit of the plexus to the quadrangular space. The axillary nerve was found to be within the split in 50% of the shoulders (n = 25) and medial to the split in the remaining 50% (n = 25). The suprascapular nerve at the level of the supraspinatous fossa passed 3.3 cm (95% CI, 3.1-3.5) medial to the superior rim of the posterior glenoid. The nerve curves around the root of the spine at the spinoglenoid notch level, approximating the glenoid rim to a distance of 2.1 cm (95% CI, 2.0-2.2). Finally, the nerve runs medially again before branching out into smaller fibers to innervate the infraspinatus muscle at a distance of 2.9 cm (95% CI, 2.7-3.1) from the inferior glenoid rim. Based on these findings, there is an approximately 2 cm-wide safe zone from the edge of the glenoid rim for the insertion of graft-fixing screws.

CONCLUSION

When performing a subscapularis split in the arthroscopic Latarjet procedure, the risk of injuries to the musculocutaneous and axillary nerves could be reduced by aiming the switching stick inserted through the posterior portal toward the lateral edge of the intended location of the split. Injuries to the suprascapular nerve could be prevented by aiming the graft-fixing screws laterally toward the edge of the glenoid rim.

CLINICAL RELEVANCE

This study clarifies the location of the nerves relevant to the arthroscopic Latarjet technique and provides anatomic information that could help the surgeon reduce the risk of injuries to the musculocutaneous, axillary, and suprascapular nerves.

摘要

背景

拉塔热技术是复发性肩关节前脱位的一种可靠治疗选择。然而,据报道其并发症发生率高达30%,其中1.6%的患者发生神经损伤。全关节镜下拉塔热手术越来越受欢迎,尽管它也带来了自身的挑战。由于外科医生无法触诊神经,其定位和保护可能很困难。此外,使用不同的器械可能导致不同的神经损伤机制。

目的

描述肌皮神经、腋神经和肩胛上神经与关节镜下拉塔热手术入路相关的解剖轨迹。利用这些信息,为减少器械操作和螺钉植入过程中的神经损伤提供指导。

研究设计

描述性实验室研究。

方法

检查了来自25个全身标本的50个尸体肩关节。将标本置于沙滩椅位,采用三角肌胸大肌入路和背侧入路暴露相关结构。在肩胛下肌腱中下三分之一之间进行劈开。用数字卡尺测量神经轨迹各点与周围解剖标志之间的距离。记录神经相对于劈开处的位置。

结果

66%(n = 33)的肩关节中肌皮神经位于劈开处内;28%(n = 14)位于劈开处内侧;2%(n = 1)位于劈开处外侧;4%(n = 2)的肩关节中未发现该神经。从神经丛出口到四边形间隙,腋神经的平均长度为4.0 cm(95%CI,3.7 - 4.2)。50%(n = 25)的肩关节中腋神经位于劈开处内,其余50%(n = 25)位于劈开处内侧。在冈上窝水平,肩胛上神经位于肩胛盂后上缘内侧3.3 cm(95%CI,3.1 - 3.5)处。该神经在肩胛下切迹水平绕过脊柱根部,距肩胛盂边缘约2.1 cm(95%CI,2.0 - 2.2)。最后,该神经再次向内侧走行,然后分支成较小的纤维,在距肩胛盂下缘2.9 cm(95%CI,2.7 - 3.1)处支配冈下肌。基于这些发现,从肩胛盂边缘向外约2 cm宽的区域是植入移植物固定螺钉的安全区。

结论

在关节镜下拉塔热手术中进行肩胛下肌劈开时,将通过后外侧入路插入的转换棒指向劈开预期位置的外侧边缘,可降低肌皮神经和腋神经损伤的风险。将移植物固定螺钉向外指向肩胛盂边缘,可预防肩胛上神经损伤。

临床意义

本研究阐明了与关节镜下拉塔热技术相关的神经位置,并提供了解剖学信息,有助于外科医生降低肌皮神经、腋神经和肩胛上神经损伤的风险。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验