Université de Liège, Gembloux Agro-Bio Tech, Unité de Science des Aliments et Formulation, Passage des Déportés 2, B-5030 Gembloux, Belgium.
Université de Liège, Gembloux Agro-Bio Tech, Unité de Science des Aliments et Formulation, Passage des Déportés 2, B-5030 Gembloux, Belgium.
Adv Colloid Interface Sci. 2016 Mar;229:25-33. doi: 10.1016/j.cis.2015.12.004. Epub 2015 Dec 17.
Partial coalescence influences to a great extent the properties of final food products such as ice cream and whipped toppings. In return, the partial coalescence occurrence and development are conditioned, in such systems, by the emulsion's intrinsic properties (e.g. solid fat content, fat crystal shape and size), formulation (e.g. protein content, surfactants presence) and extrinsic factors (e.g. cooling rate, shearing). A set of methods is available for partial coalescence investigation and quantification. These methods are critically reviewed in this paper, balancing the weaknesses of the methods in terms of structure alteration (for turbidity, dye dilution, etc.) and assumptions made for mathematical models (for particle size determination) with their advantages (good repeatability, high sensitivity, etc.). With the methods proposed in literature, the partial coalescence investigations can be conducted quantitatively and/or qualitatively. Good correlation were observed between some of the quantitative methods such as dye dilution, calorimetry, fat particle size; while a poor correlation was found in the case of solvent extraction method with other quantitative methods. The most suitable way for partial coalescence quantification was implied to be the fat particle size method, which would give results with a high degree of confidence if used in combination with a microscopic technique for the confirmation of partial coalescence as the main destabilization mechanism.
部分聚结在很大程度上影响最终食品产品的性质,如冰淇淋和搅打奶油。反过来,这种体系中乳状液的固有性质(如固体脂肪含量、脂肪晶体形状和大小)、配方(如蛋白质含量、表面活性剂的存在)和外在因素(如冷却速率、剪切)决定了部分聚结的发生和发展。有一系列方法可用于研究和量化部分聚结。本文对这些方法进行了批判性的回顾,权衡了这些方法在结构改变方面的弱点(对于浊度、染料稀释等)和数学模型假设方面的弱点(对于粒径测定)与其优势(良好的重现性、高灵敏度等)。利用文献中提出的方法,可以对部分聚结进行定量和/或定性研究。在一些定量方法之间观察到了很好的相关性,如染料稀释、量热法、脂肪颗粒大小;而在溶剂萃取法与其他定量方法的情况下,相关性较差。如果与显微镜技术结合使用,以确认部分聚结是主要的失稳机制,则脂肪颗粒大小方法是进行部分聚结定量的最合适方法,因为该方法如果使用得当,将得出高度可信的结果。