Nardo Lorenzo, Carballido-Gamio Julio, Tang Solomon, Lai Andrew, Krug Roland
Musculoskeletal Quantitative Imaging Research Group, Department of Radiology and Biomedical Imaging, University of California, San Francisco, 185 Berry Street, San Francisco, CA, 94107, USA.
Eur Radiol. 2016 Dec;26(12):4656-4663. doi: 10.1007/s00330-016-4322-6. Epub 2016 Mar 18.
The aim of this study was to assess the feasibility of quantifying shoulder cartilage morphology and relaxometry in a clinically feasible scan time comparing different pulse sequences and assessing their reproducibility at 3 Tesla.
Three pulse sequences were compared for morphological assessments of shoulder cartilage thickness and volume (SPGR, MERGE, FIESTA), while a combined T1ρ-T2 sequence was optimized for relaxometry measurements. The shoulders of six healthy subjects were scanned twice with repositioning, and the cartilage was segmented and quantified. The degree of agreement between the three morphological sequences was assessed using Bland-Altman plots, while the morphological and relaxometry reproducibility were assessed with root-mean-square coefficients of variation (RMS-CVs) RESULTS: Bland-Altman plots indicated good levels of agreement between the morphological assessments of the three sequences. The reproducibility of morphological assessments yielded RMS-CVs between 4.0 and 17.7 %. All sequences correlated highly (R > 0.9) for morphologic assessments with no statistically significant differences. For relaxometry assessments of humeral cartilage, RMS-CVs of 6.4 and 10.6 % were found for T1ρ and T2, respectively.
The assessment of both cartilage morphology and relaxometry is feasible in the shoulder with SPGR, humeral head, and T1ρ being the more reproducible morphological sequence, anatomic region, and quantitative sequence, respectively.
• The thin cartilage morphology can be assessed in the shoulder in vivo. • Non-invasive biochemical assessment of shoulder cartilage is feasible in vivo using MRI.
本研究旨在评估在临床可行的扫描时间内,比较不同脉冲序列量化肩部软骨形态和弛豫测量的可行性,并评估其在3特斯拉场强下的可重复性。
比较了三种脉冲序列用于肩部软骨厚度和体积的形态学评估(扰相梯度回波序列(SPGR)、多回波数据图像组合(MERGE)、快速成像稳态采集序列(FIESTA)),同时优化了一种T1ρ-T2联合序列用于弛豫测量。对6名健康受试者的肩部进行两次扫描,每次扫描前重新定位,然后对软骨进行分割和量化。使用布兰德-奥特曼图评估三种形态学序列之间的一致性程度,而形态学和弛豫测量的可重复性则用均方根变异系数(RMS-CVs)进行评估。结果:布兰德-奥特曼图表明三种序列形态学评估之间具有良好的一致性水平。形态学评估的可重复性产生的RMS-CVs在4.0%至17.7%之间。所有序列在形态学评估方面高度相关(R>0.9),无统计学显著差异。对于肱骨软骨的弛豫测量评估,T1ρ和T2的RMS-CVs分别为6.4%和10.6%。
在肩部评估软骨形态和弛豫测量是可行的,其中SPGR、肱骨头和T1ρ分别是更具可重复性的形态学序列、解剖区域和定量序列。
• 可在体内评估肩部薄软骨形态。• 使用磁共振成像(MRI)在体内对肩部软骨进行无创生化评估是可行的。