Rosch R, Trosseille C, Caillaud T, Allouche V, Bourgade J L, Briat M, Brunel P, Burillo M, Casner A, Depierreux S, Gontier D, Jadaud J P, Le Breton J P, Llavador P, Loupias B, Miquel J L, Oudot G, Perez S, Raimbourg J, Rousseau A, Rousseaux C, Rubbelynck C, Stemmler P, Troussel P, Ulmer J L, Wrobel R, Beauvais P, Pallet M, Prevot V
CEA-DAM Ile de France, Bruyères-le-Châtel, 91297 Arpajon Cedex, France.
CEA-CESTA, 15 Avenue des Sablières, 33114 Le Barp, France.
Rev Sci Instrum. 2016 Mar;87(3):033706. doi: 10.1063/1.4942930.
The Laser Megajoule (LMJ) facility located at CEA/CESTA started to operate in the early 2014 with two quadruplets (20 kJ at 351 nm) focused on target for the first experimental campaign. We present here the first set of gated x-ray imaging (GXI) diagnostics implemented on LMJ since mid-2014. This set consists of two imaging diagnostics with spatial, temporal, and broadband spectral resolution. These diagnostics will give basic measurements, during the entire life of the facility, such as position, structure, and balance of beams, but they will also be used to characterize gas filled target implosion symmetry and timing, to study x-ray radiography and hydrodynamic instabilities. The design requires a vulnerability approach, because components will operate in a harsh environment induced by neutron fluxes, gamma rays, debris, and shrapnel. Grazing incidence x-ray microscopes are fielded as far as possible away from the target to minimize potential damage and signal noise due to these sources. These imaging diagnostics incorporate microscopes with large source-to-optic distance and large size gated microchannel plate detectors. Microscopes include optics with grazing incidence mirrors, pinholes, and refractive lenses. Spatial, temporal, and spectral performances have been measured on x-ray tubes and UV lasers at CEA-DIF and at Physikalisch-Technische Bundesanstalt BESSY II synchrotron prior to be set on LMJ. GXI-1 and GXI-2 designs, metrology, and first experiments on LMJ are presented here.
位于法国原子能委员会/CESTA的兆焦耳激光装置(LMJ)于2014年初开始运行,首批两台四束激光装置(波长351纳米,能量20千焦)聚焦于靶标,开启了首次实验活动。本文介绍了自2014年年中以来在LMJ上首次实施的一组门控X射线成像(GXI)诊断设备。该组设备包括两种具有空间、时间和宽带光谱分辨率的成像诊断设备。这些诊断设备将在该装置的整个运行周期内进行基本测量,例如光束的位置、结构和平衡,但它们也将用于表征充气靶标的内爆对称性和时间,研究X射线成像和流体动力学不稳定性。设计需要采用一种抗脆弱性方法,因为部件将在由中子通量、伽马射线、碎片和弹片引起的恶劣环境中运行。掠入射X射线显微镜尽可能布置在远离靶标的位置,以尽量减少这些源造成的潜在损坏和信号噪声。这些成像诊断设备采用了源到光学元件距离大的显微镜和大型门控微通道板探测器。显微镜包括带有掠入射镜、针孔和折射透镜的光学元件。在安装到LMJ之前,已在法国原子能委员会DIF和德国联邦物理技术研究院BESSY II同步加速器的X射线管和紫外激光器上测量了空间、时间和光谱性能。本文介绍了GXI-1和GXI-2的设计、计量以及在LMJ上的首次实验。