Department of Chemical and Biological Engineering, Illinois Institute of Technology, Chicago, IL 60616, USA.
Department of Chemical and Biological Engineering, Illinois Institute of Technology, Chicago, IL 60616, USA.
J Colloid Interface Sci. 2017 Jul 15;498:112-122. doi: 10.1016/j.jcis.2017.03.050. Epub 2017 Mar 12.
Understanding the interactions between bacteria and solid surfaces that result in bacterial adhesion and removal is of immense importance for reducing foodborne illness outbreaks. A nanofluid formulation comprised of a sodium dodecyl sulfate (SDS) micellar aqueous solution in the presence of an organic acid (as a pH controller) was used to test the E. coli K12 removal from two substrates, polyvinylchloride (PVC) and partially hydrophobic glass. We investigated the bacterial removal efficacy based on the combined effect of the nanofluid's structural forces and bacterial isoelectric point. To quantify the bacteria-PVC coverage, we used fluorescence microscope. The Langmuir isotherm at the low volume fraction was applied to estimate the adsorption energy of E. coli K12. We obtained a value of about 2.5±0.2kT. This value compared favorably with the value of 2.1kT reported previously for E. coli NCTC 9002 (Vanloosdrecht et al., 1989). We applied the dynamic light scattering method to estimate the radius of the gyration of E. coli K12. The radius of the gyration was used to estimate the limit of surface area covered by the bacterium and compared it to the surface area measured from the image taken with fluorescence microscope. We found that they are in good agreement with each other. We modeled the nanofluid oscillatory structural energy against the E. coli K12 adsorption energy by applying the statistical mechanics approach. Based on the model prediction, the oscillatory interaction energy was estimated at the vertex between a bacterium and the substrate (i.e., the wedge film's interaction energy at one particle layer). The evaluated film's repulsive energy due to the oscillatory structural forces (OSF) was about 15.6±4.4kT of the 0.02M SMNF (the SDS micellar nanofluid formulation) and several times higher than the bacterial adsorption energy, 2.5±0.2kT. The OSF of the 0.06M SMNF was measured by AFM (the oscillatory decay force curve). The period and number of oscillations versus distance was annualized and used to obtain information for the effective size of the nanoparticles and nanofluid's effective volume fraction. These findings suggest that the OSF is capable of bacteria/microorganism removal from contaminated substrates.
理解导致细菌附着和去除的细菌与固体表面之间的相互作用对于减少食源性疾病爆发至关重要。一种由十二烷基硫酸钠(SDS)胶束水溶液和有机酸(作为 pH 控制器)组成的纳米流体制剂被用于测试大肠杆菌 K12 从两种基质(聚氯乙烯(PVC)和部分疏水性玻璃)上的去除。我们基于纳米流体的结构力和细菌等电点的综合影响来研究细菌去除效果。为了量化细菌-PVC 的覆盖范围,我们使用荧光显微镜。在低体积分数下应用 Langmuir 等温线来估计大肠杆菌 K12 的吸附能。我们得到了约 2.5±0.2kT 的值。该值与先前报道的大肠杆菌 NCTC 9002 的 2.1kT 值(Vanloosdrecht 等人,1989 年)相比是有利的。我们应用动态光散射方法来估计大肠杆菌 K12 的回转半径。回转半径用于估计细菌覆盖的表面积,并将其与荧光显微镜拍摄的图像测量的表面积进行比较。我们发现它们彼此吻合得很好。我们通过应用统计力学方法,将纳米流体的振荡结构能量与大肠杆菌 K12 的吸附能量建模。根据模型预测,在细菌和基质之间的顶点处(即楔形膜在一层粒子处的相互作用能)估计了振荡相互作用能。由于振荡结构力(OSF)而产生的膜排斥能约为 0.02M SMNF(SDS 胶束纳米流体制剂)的 15.6±4.4kT,是细菌吸附能的几倍,即 2.5±0.2kT。通过 AFM(振荡衰减力曲线)测量了 0.06M SMNF 的 OSF。周期和距离的振荡次数进行了年化处理,并用于获取有关纳米颗粒的有效尺寸和纳米流体的有效体积分数的信息。这些发现表明,OSF 能够从污染的基质中去除细菌/微生物。