State Key Laboratory on Integrated Optoelectronics and College of Electronic Science and Engineering, Jilin University, Changchun 130012, People's Republic of China. College of Material Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, People's Republic of China.
Nanotechnology. 2017 May 26;28(21):215703. doi: 10.1088/1361-6528/aa6cd8. Epub 2017 Apr 12.
Recently, near-infrared light-emitting diodes (NIR LEDs) based on PbSe quantum dots (QDs) have attracted considerable attention due to their facilely tunable emission wavelength, as well as high quantum yield. However, the low external quantum efficiency (EQE) of these LEDs has restricted their actual applications because of the non-radiative recombination caused by the aggregation in the solid-state QD films. Therefore, we proposed in this work to employ the liquid-type structure in NIR LEDs base on PbSe QDs, which exhibited the main advantages relying on the fact that the liquid structure could prevent the active layer from self-aggregation and improve the device stability. The emission intensity of these NIR LEDs was optimized by tuning the concentration of PbSe QDs. Besides, the radiation power of PbSe QD-based devices with different emission wavelengths was analyzed under different biases, and the maximum EQE of NIR LEDs was confirmed to be 5.3%. This result represents the highest record among the reported NIR QD-LEDs, indicating this kind of liquid-type NIR LEDs is promising for commercial applications.
近年来,基于 PbSe 量子点(QDs)的近红外发光二极管(NIR LEDs)由于其发射波长可调谐以及高光量子产率而受到了相当大的关注。然而,由于固态 QD 薄膜中的聚集导致非辐射复合,这些 LED 的外量子效率(EQE)较低,限制了它们的实际应用。因此,我们在这项工作中提出在基于 PbSe QDs 的 NIR LEDs 中采用液体结构,其主要优势在于液体结构可以防止有源层自聚集并提高器件稳定性。通过调整 PbSe QDs 的浓度来优化这些 NIR LEDs 的发射强度。此外,还分析了不同发射波长的 PbSe QD 基器件在不同偏压下的辐射功率,证实了 NIR LEDs 的最大 EQE 为 5.3%。这一结果在已报道的 NIR QD-LED 中创下了最高纪录,表明这种液体型 NIR LEDs 有望在商业应用中得到应用。