Guo Muran, Chen Tao, Wang Ben
College of Information and Communication Engineering, Harbin Engineering University, No. 145 Nantong Street, Harbin 150001, China.
Depaprtment of Electrical and Computer Engineering, Temple University, Philadelphia, PA 19122, USA.
Sensors (Basel). 2017 May 16;17(5):1140. doi: 10.3390/s17051140.
Co-prime arrays can estimate the directions of arrival (DOAs) of O ( M N ) sources with O ( M + N ) sensors, and are convenient to analyze due to their closed-form expression for the locations of virtual lags. However, the number of degrees of freedom is limited due to the existence of holes in difference coarrays if subspace-based algorithms such as the spatial smoothing multiple signal classification (MUSIC) algorithm are utilized. To address this issue, techniques such as positive definite Toeplitz completion and array interpolation have been proposed in the literature. Another factor that compromises the accuracy of DOA estimation is the limitation of the number of snapshots. Coarray-based processing is particularly sensitive to the discrepancy between the sample covariance matrix and the ideal covariance matrix due to the finite number of snapshots. In this paper, coarray interpolation based on matrix completion (MC) followed by a denoising operation is proposed to detect more sources with a higher accuracy. The effectiveness of the proposed method is based on the capability of MC to fill in holes in the virtual sensors and that of MC denoising operation to reduce the perturbation in the sample covariance matrix. The results of numerical simulations verify the superiority of the proposed approach.
互质阵列能够利用(O(M + N))个传感器估计(O(MN))个源的到达方向(DOA),并且由于其虚拟延迟位置的闭式表达式,便于进行分析。然而,如果使用基于子空间的算法,如空间平滑多重信号分类(MUSIC)算法,由于差分共阵列中存在空洞,自由度的数量会受到限制。为了解决这个问题,文献中提出了正定Toeplitz完备化和阵列插值等技术。另一个影响DOA估计精度的因素是快照数量的限制。由于快照数量有限,基于共阵列的处理对样本协方差矩阵和理想协方差矩阵之间的差异特别敏感。本文提出了基于矩阵完备化(MC)并随后进行去噪操作的共阵列插值,以更高的精度检测更多的源。所提方法的有效性基于MC填充虚拟传感器中空洞的能力以及MC去噪操作减少样本协方差矩阵中扰动的能力。数值模拟结果验证了所提方法的优越性。