Paul-Drude-Institut für Festkörperelektronik , Hausvogteiplatz 5-7, 10117 Berlin, Germany.
Nano Lett. 2017 Aug 9;17(8):4654-4660. doi: 10.1021/acs.nanolett.7b01136. Epub 2017 Jul 27.
The fabrication of nanowires with axial multiquantum wells or disks presenting a homogeneous size and shape distribution along the whole stack is still an unresolved challenge, despite being essential for narrowing their light emission bandwidth. In this work we demonstrate that the commonly observed change in the shape of the disks along the stacking direction proceeds in a systematic, predictable way. High- resolution transmission electron microscopy of stacked (In,Ga)N quantum discs embedded in GaN nanowires with diameters of ∼40 nm and lengths of ∼700 nm and finite element method calculations show that, contrary to what is normally assumed, this change is not related to the radial growth of the nanowires, which is shown to be negligible, but to the strain relaxation of the whole active region. A simple model is proposed to account for the experimental observations. The model assumes that each disk reaches an equilibrium shape that minimizes the overall energy of the system, given by the sum of the surface and strain energies of the disk itself and the barrier below. The strain state of the barrier is affected by the presence of the disk buried directly below in a way that depends on its shape. This gives rise to a cumulative process, which makes the aspect ratio of each quantum disk to be smaller compared to the disk grown just before, in qualitative agreement with the experimental observations. The obtained results imply that strain relaxation is an important factor to bear in mind for the design of multiquantum disks with controlled shape along the stacking direction in any lattice mismatched nanowire system.
尽管对于缩小其发光带宽至关重要,但具有轴向多量子阱或盘的纳米线的制造,其整体呈现均匀的尺寸和形状分布,仍然是一个尚未解决的挑战。在这项工作中,我们证明了沿堆叠方向观察到的盘形状的变化是系统的、可预测的。对直径约为 40nm、长度约为 700nm 的堆叠(In,Ga)N 量子盘的高分辨率透射电子显微镜观察以及有限元法计算表明,与通常假设的相反,这种变化与纳米线的径向生长无关,而纳米线的径向生长可以忽略不计,而是与整个有源区的应变弛豫有关。提出了一个简单的模型来解释实验观察。该模型假设每个盘都达到了一种平衡形状,这种形状使系统的总能量最小,该总能量由盘自身的表面能和应变能以及下面的势垒的表面能和应变能之和决定。势垒的应变状态受到直接埋在下面的盘的形状的影响。这导致了一个累积过程,使得每个量子盘的纵横比与之前生长的盘相比要小,这与实验观察结果定性一致。研究结果表明,在任何晶格失配的纳米线系统中,为了设计具有沿堆叠方向控制形状的多量子盘,应变弛豫是一个需要考虑的重要因素。