Departamento de Biologia Celular e Genética, CB-UFRN, Universidade Federal do Rio Grande do Norte, Campus Universitário, Lagoa Nova, 59072-970, Natal, RN, Brazil.
Programa de Pós Graduação em Ciências da Saúde, Natal, RN, Brazil.
Stem Cell Res Ther. 2017 Nov 28;8(1):269. doi: 10.1186/s13287-017-0717-9.
Titanium surfaces have been modified by various approaches with the aim of improving the stimulation of osseointegration. Laser beam (Yb-YAG) treatment is a controllable and flexible approach to modifying surfaces. It creates a complex surface topography with micro and nano-scaled patterns, and an oxide layer that can improve the osseointegration of implants, increasing their usefulness as bone implant materials.
Laser beam irradiation at various fluences (132, 210, or 235 J/cm) was used to treat commercially pure titanium discs to create complex surface topographies. The titanium discs were investigated by scanning electron microscopy, X-ray diffraction, and measurement of contact angles. The surface generated at a fluence of 235 J/cm was used in the biological assays. The behavior of mesenchymal stem cells from an umbilical cord vein was evaluated using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, a mineralization assay, and an alkaline phosphatase activity assay and by carrying out a quantitative real-time polymerase chain reaction for osteogenic markers. CHO-k1 cells were also exposed to titanium discs in the MTT assay.
The best titanium surface was that produced by laser beam irradiation at 235 J/cm fluence. Cell proliferation analysis revealed that the CHO-k1 and mesenchymal stem cells behaved differently. The laser-processed titanium surface increased the proliferation of CHO-k1 cells, reduced the proliferation of mesenchymal stem cells, upregulated the expression of the osteogenic markers, and enhanced alkaline phosphatase activity.
The laser-treated titanium surface modulated cellular behavior depending on the cell type, and stimulated osteogenic differentiation. This evidence supports the potential use of laser-processed titanium surfaces as bone implant materials, and their use in regenerative medicine could promote better outcomes.
各种方法已被用于钛表面改性,目的是改善骨整合刺激。激光束(Yb-YAG)处理是一种可控制和灵活的表面改性方法。它可以在微纳尺度上创建复杂的表面形貌,并形成氧化层,从而提高植入物的骨整合能力,增强其作为骨植入材料的用途。
使用不同的激光束辐照能(132、210 或 235 J/cm)处理商用纯钛盘,以创建复杂的表面形貌。使用扫描电子显微镜、X 射线衍射和接触角测量对钛盘进行了研究。在 235 J/cm 的辐照能下产生的表面用于生物学测定。使用 3-(4,5-二甲基噻唑-2-基)-2,5-二苯基四氮唑溴盐(MTT)测定法、矿化测定法和碱性磷酸酶活性测定法以及进行定量实时聚合酶链反应来评估脐带静脉间充质干细胞的行为,以评估成骨标志物。还在 MTT 测定中用 CHO-k1 细胞暴露于钛盘。
最佳钛表面是在 235 J/cm 激光束辐照能下产生的。细胞增殖分析表明,CHO-k1 和间充质干细胞的行为不同。激光处理的钛表面增加了 CHO-k1 细胞的增殖,减少了间充质干细胞的增殖,上调了成骨标志物的表达,并增强了碱性磷酸酶活性。
激光处理的钛表面根据细胞类型调节细胞行为,并刺激成骨分化。这一证据支持将激光处理的钛表面用作骨植入材料的潜力,并且它们在再生医学中的应用可以促进更好的结果。