Chen George Y, Piantedosi Fiorina, Otten Dale, Kang Yvonne Qiongyue, Zhang Wen Qi, Zhou Xiaohong, Monro Tanya M, Lancaster David G
Laser Physics and Photonic Devices Laboratories, School of Engineering, University of South Australia, Mawson Lakes, South Australia, 5095, Australia.
State Key Joint Laboratory of ESPC, School of Environment, Tsinghua University, Beijing, 10084, China.
Sci Rep. 2018 Jul 10;8(1):10377. doi: 10.1038/s41598-018-28631-3.
There is a deficiency of low-loss microstructured waveguides that can be fabricated with a single laser-pass to minimize stress build-up, which can enable enhanced functionality and higher compactness for integrated optical devices. We demonstrate, for the first time, a series of multi-ring claddings each with a pair of cores in BK7 glass. Each waveguide was fabricated using only a single laser-pass at 1 MHz pulse repetition rate, 5 mm/s translation speed, 250 fs pulse width, over a set of pulse energies. We obtained the lowest-reported propagation loss of 0.062 dB/cm, measured at 1155 nm wavelength from the waveguide written with 340 nJ pulse energy. The maximum observed numerical aperture is 0.020, measured at 1155 nm wavelength from the waveguide written with 620 nJ pulse energy. Such waveguides could be incorporated in integrated Raman laser platforms for biomedical applications.
能够通过单次激光照射制造以最小化应力积累的低损耗微结构波导存在不足,而这可以实现集成光学器件增强的功能和更高的紧凑性。我们首次展示了一系列在BK7玻璃中每个都有一对纤芯的多环包层。每个波导仅在1MHz脉冲重复率、5mm/s平移速度、250fs脉冲宽度下,通过一组脉冲能量的单次激光照射来制造。我们获得了报告中最低的0.062dB/cm的传播损耗,该损耗是在1155nm波长下对用340nJ脉冲能量写入的波导进行测量得到的。观察到的最大数值孔径为0.020,是在1155nm波长下对用620nJ脉冲能量写入的波导进行测量得到的。这种波导可用于生物医学应用的集成拉曼激光平台中。