Romanyuk O, Varga M, Tulic S, Izak T, Jiricek P, Kromka A, Skakalova V, Rezek B
Institute of Physics, Academy of Sciences of the Czech Republic, Cukrovarnická 10, 162 00 Prague 6, Czech Republic.
Physics of Nanostructured Materials, Faculty of Physics, University of Vienna, Boltzmanngasse 5, 1090 Vienna, Austria.
J Phys Chem C Nanomater Interfaces. 2018 Mar 29;122(12):6629-6636. doi: 10.1021/acs.jpcc.7b12334. Epub 2018 Mar 12.
Graphene on diamond has been attracting considerable attention due to the unique and highly beneficial features of this heterostructure for a range of electronic applications. Here, ultrahigh-vacuum X-ray photoelectron spectroscopy is used for analysis of the temperature dependence of the Ni-assisted thermally induced graphitization process of intrinsic nanocrystalline diamond thin films (65 nm thickness, 50-80 nm grain size) on silicon wafer substrates. Three major stages of diamond film transformation are determined from XPS during the thermal annealing in the temperature range from 300 °C to 800 °C. Heating from 300 °C causes removal of oxygen; formation of the disordered carbon phase is observed at 400 °C; the disordered carbon progressively transforms to graphitic phase whereas the diamond phase disappears from the surface from 500 °C. In the well-controllable temperature regime between 600 °C and 700 °C, the nanocrystalline diamond thin film is mainly preserved, while graphitic layers form on the surface as the predominant carbon phase. Moreover, the graphitization is facilitated by a disordered carbon interlayer that inherently forms between diamond and graphitic layers by Ni catalyst. Thus, the process results in formation of a multilayer heterostructure on silicon substrate.
由于这种异质结构在一系列电子应用中具有独特且极为有益的特性,金刚石上的石墨烯一直备受关注。在此,超高真空X射线光电子能谱被用于分析硅片衬底上本征纳米晶金刚石薄膜(厚度65纳米,晶粒尺寸50 - 80纳米)在镍辅助热诱导石墨化过程中的温度依赖性。在300°C至800°C温度范围内进行热退火时,通过XPS确定了金刚石薄膜转变的三个主要阶段。从300°C开始加热会导致氧的去除;在400°C时观察到无序碳相的形成;无序碳逐渐转变为石墨相,而从500°C起金刚石相从表面消失。在600°C至700°C这个可控的温度区间内,纳米晶金刚石薄膜基本得以保留,而石墨层作为主要的碳相在表面形成。此外,镍催化剂会在金刚石和石墨层之间固有地形成一个无序碳中间层,从而促进石墨化。因此,该过程导致在硅衬底上形成多层异质结构。