Suppr超能文献

机器人辅助经皮椎弓根螺钉固定辅助斜外侧椎间融合术:这种新型微创技术的准确性和安全性评估

Robot-assisted Percutaneous Transfacet Screw Fixation Supplementing Oblique Lateral Interbody Fusion Procedure: Accuracy and Safety Evaluation of This Novel Minimally Invasive Technique.

作者信息

Wu Jing-Ye, Yuan Qiang, Liu Ya-Jun, Sun Yu-Qing, Zhang Yong, Tian Wei

机构信息

Department of Spine Surgery, Beijing Jishuitan Hospital, Beijing, China.

Beijing Key Laboratory of Robotic Orthopaedics, Beijing, China.

出版信息

Orthop Surg. 2019 Feb;11(1):25-33. doi: 10.1111/os.12428. Epub 2019 Feb 18.

Abstract

OBJECTIVES

Percutaneous transfacet screw fixation (pTSF) is a minimally invasive posterior fixation technique supplementing oblique lateral interbody fusion (OLIF) for lumbar spinal disorders. Accurate screw insertion is difficult to achieve and technically demanding under 2-D fluoroscopy. Recently developed robot-assisted spinal surgery demonstrated a high level of accuracy of pedicle screw insertion and a low complication rate. No published study has reported this combination technique. The aim of our study was to evaluate the accuracy and safety properties of the combination of both minimally invasive techniques: robot-assisted pTSF supplementing the OLIF procedure.

METHODS

This was an experimental and prospective study. Selected consecutive patients with lumbar degenerative disorders received robot-assisted pTSF supplementing the OLIF procedure using the TianJi Robot system operated by one senior surgeon from March to October 2018. The accuracy of screw insertion and perioperative screw-related complications were evaluated. Assessment of the accuracy of screw insertion included intraoperative robotic guidance accuracy and incidence of screw encroachments. Intraoperative robotic guidance accuracy referred to translational and angular deviations of screws, which were assessed by comparing the planned and actual screw trajectories guided by the robot on reconstructed images using TianJi Robot Planning Software. Screw encroachments were evaluated on postoperative CT images and classified by a grading system (A, excellent; B, good; C, poor). Screw-related complications including intraoperative pin skidding, screw malposition and adjustment, together with postoperative neurological symptoms that correlated with screw malposition were recorded.

RESULTS

Ten patients, with an average age of 60.2 years, were selected and recruited in this study. All cases were degenerative lumbar spinal disorders, out of which there were 6 cases of Meyerding Grade I degenerative spondylolisthesis. Twenty-four transfacet screws were inserted by robotic assistance. Instrumented levels included nine segments at L level and three segments at L level. Two patients had both L and L level fixation. The average surgical time was 3.3 h (SD, 0.8 h). The mean blood loss was 90 mL (SD, 32 mL). Intraoperative guidance accuracy showed 1.09 ± 0.17 mm (ranging from 0.75 to 1.22 mm) translational deviation and 2.17° ± 0.39° (ranging from 1.47° to 2.54°) angular deviation. The gradings of screw encroachment were: 17 screws (71%) with Grade A, 6 screws (25%) with Grade B, and 1 screw (4%) with Grade C. Only one pin skidding occurred intraoperatively and revised subsequently. No postoperative neurological complications were found.

CONCLUSION

Our preliminary study of robot-assisted pTSF supplementing the OLIF procedure showed a high level of accuracy for screw insertion and this minimally invasive combination technique was found to be a feasible and safe procedure.

摘要

目的

经皮关节突螺钉固定术(pTSF)是一种微创后路固定技术,用于辅助斜外侧椎间融合术(OLIF)治疗腰椎疾病。在二维透视下,准确插入螺钉很难实现且技术要求高。最近开发的机器人辅助脊柱手术在椎弓根螺钉插入方面显示出高度的准确性和较低的并发症发生率。尚无已发表的研究报道过这种联合技术。我们研究的目的是评估这两种微创技术联合应用的准确性和安全性:机器人辅助pTSF辅助OLIF手术。

方法

这是一项实验性前瞻性研究。2018年3月至10月,选择连续的腰椎退行性疾病患者,由一位资深外科医生使用天玑机器人系统进行机器人辅助pTSF辅助OLIF手术。评估螺钉插入的准确性和围手术期与螺钉相关的并发症。螺钉插入准确性的评估包括术中机器人引导准确性和螺钉侵犯情况。术中机器人引导准确性是指螺钉的平移和角度偏差,通过使用天玑机器人规划软件在重建图像上比较机器人引导的计划和实际螺钉轨迹来评估。术后CT图像上评估螺钉侵犯情况,并通过分级系统进行分类(A级,优秀;B级,良好;C级,差)。记录与螺钉相关的并发症,包括术中针打滑、螺钉位置不当及调整,以及与螺钉位置不当相关的术后神经症状。

结果

本研究选择并纳入了10例患者,平均年龄60.2岁。所有病例均为腰椎退行性疾病,其中6例为迈耶丁I级退行性腰椎滑脱。通过机器人辅助插入了24枚关节突螺钉。固定节段包括L节段的9个节段和L节段的3个节段。2例患者同时进行了L和L节段固定。平均手术时间为3.3小时(标准差,0.8小时)。平均失血量为90毫升(标准差,32毫升)。术中引导准确性显示平移偏差为1.09±0.17毫米(范围为0.75至1.22毫米),角度偏差为2.17°±0.39°(范围为1.47°至2.54°)。螺钉侵犯的分级为:17枚螺钉(71%)为A级,6枚螺钉(25%)为B级,1枚螺钉(4%)为C级。术中仅发生1次针打滑,随后进行了修正。未发现术后神经并发症。

结论

我们对机器人辅助pTSF辅助OLIF手术的初步研究表明,螺钉插入具有高度准确性,并且这种微创联合技术是一种可行且安全的手术。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/455d/6430475/101ce394a751/OS-11-25-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验