Diaz Fabian A, Gutierrez Emilio J, Cramer Eddie, Paccamonti Dale L, Gentry Glen T, Bondioli Kenneth R
School of Animal Sciences, Louisiana State University Agricultural Center, Baton Rouge, LA.
School of Animal Sciences, Louisiana State University Agricultural Center, Baton Rouge, LA.
J Equine Vet Sci. 2018 May;64:12-16. doi: 10.1016/j.jevs.2018.01.009. Epub 2018 Feb 16.
Satisfactory pregnancy rates can now be achieved following the cryopreservation of large equine embryos. Nonetheless, its wide application might be limited by the fact that the cryopreservation of large equine embryos requires a specialized micromanipulation equipment and micromanipulation/vitrification skills. Alternatives should be developed to increase its utilization and widespread application in the commercial equine industry. To determine if large equine embryos are able to remain viable during transport from farms to specialized centers for embryo cryopreservation, we evaluated pregnancy rates following the low-temperature storage of large equine embryos before vitrification. Grade 1 embryos (n = 37) were randomly assigned to six treatments consisting of day of collection (Day 7 or 8 after ovulation) and cooling for 0, 12, or 24 hours before vitrification in a factorial design. Pregnancy rates of Day 7 embryos cooled for 12 and 24 hours were 55.5% and 75%, respectively. Pregnancy rates of Day 8 embryos cooled for 12 and 24 hours were 0 and 16.6%, respectively. Day 7 cooled embryos resulted in higher pregnancy rate compared with Day 8 cooled embryos (64.7% and 7.7%, respectively; P < .05). Pregnancy rate comparison of cooled embryos grouped by diameter showed that embryos <550 μm resulted in a higher pregnancy rate compared with embryos >550 μm (71.4% and 12.5% respectively; P < .05). In conclusion, Day 7 equine embryos up to 550 μm can be cooled to temperatures of 9-12°C for 12 or 24 hours before vitrification and result in satisfactory pregnancy rates.
目前,大型马胚胎冷冻保存后可获得令人满意的妊娠率。然而,大型马胚胎冷冻保存需要专门的显微操作设备和显微操作/玻璃化技术,这一事实可能会限制其广泛应用。应开发替代方法,以提高其在商业养马业中的利用率和广泛应用。为了确定大型马胚胎在从农场运输到专门的胚胎冷冻保存中心的过程中是否能够保持活力,我们评估了大型马胚胎在玻璃化前低温保存后的妊娠率。将1级胚胎(n = 37)随机分为六种处理组,采用析因设计,处理因素包括采集日(排卵后第7天或第8天)以及在玻璃化前冷却0、12或24小时。排卵后第7天的胚胎冷却12小时和24小时后的妊娠率分别为55.5%和75%。排卵后第8天的胚胎冷却12小时和24小时后的妊娠率分别为0和16.6%。与排卵后第8天冷却的胚胎相比,排卵后第7天冷却的胚胎妊娠率更高(分别为64.7%和7.7%;P < 0.05)。按直径分组的冷却胚胎妊娠率比较显示,直径<550μm的胚胎妊娠率高于直径>550μm的胚胎(分别为71.4%和12.5%;P < 0.05)。总之,直径达550μm的排卵后第7天马胚胎在玻璃化前可冷却至9 - 12°C 12或24小时,并获得令人满意的妊娠率。