Sammartano Antonino, Scarlattei Maura, Migliari Silvia, Baldari Giorgio, Ruffini Livia
Azienda Ospedaliero-Universitaria di Parma.
Acta Biomed. 2019 Sep 6;90(3):275-280. doi: 10.23750/abm.v90i3.7767.
Selective imaging of the splenic tissue is obtained with heat-damaged, or heat-denatured, red blood cells (RBCs) of the patient labeled with 99mTc in a variety of clinical scenarios. Aim of the study was to validate the process used for labelling heat-damaged red blood cells "totally in vitro", after blood sample collection, before re-inject labeled RBCs to the patient. Moreover, we assessed efficacy of the staff training programme in order to guarantee repeatibility and method standardization in the clinical routine.
The validation process of the labeling procedure was performed in three different patients during three consecutive days. After collection of a blood sample using a heparinized syringe, we isolated erythrocytes from other blood components by centrifugation and washing steps. Then, we added the stannous pyrophosphate (PYP) to the erythrocytes pellet, after pH control. The 'pretinning' of RBCs was necessary to reduce Tc-99m once pertechnetate was entered them. After the labeling reaction with 130 MBq of 99mTc-pertechnetate, the erythrocytes were denatured in a water bath at a temperature of 49°-50°C, for 10 min. Radioactivity of blood aliquotes was measured with a dose calibrator and labelling efficiency (LE%) was determined. The labelling purity was measured using a gamma counter and calculated using the formula: counts of pellet/counts of pellet+(counts of surnatant)*100.Training program was evaluated using a Learning Questionnaire (LQ). with a grading score from 6 ("") to 1 ("nothing") for each operator (n=3).
We didn't observed the presence of macroaggregates during the entire process, until the final sample. The labelling efficiency resulted at very high values in the three consecutive measured aliquotes (mean value 73.67%) as well as the labelling purity (>95.22%). In our instituion, we use splenic imaging with labelled heat-damaged RBCs to detect ectopic spleen, splenosis, extramedullary hematopoiesis. We performed 3 procedures with heat-damaged labeled RBCs with a mean labelling efficiency 73.67%.Training and learning programmes were scored by key objective areas with a mean value of 5.
Our in vitro labeling process of heat-damaged RBCs is simple and safe, providing a useful technique easy to implement in clinical routine for splenic imaging Learning outcome of the training programme was scored as effective by all the operators with evidence of high-efficiency-reproducible procedure mantained over time.
在多种临床情况下,通过用99mTc标记患者热损伤或热变性的红细胞(RBC)来实现脾脏组织的选择性成像。本研究的目的是验证在采集血样后、将标记的RBC重新注入患者之前“完全在体外”标记热损伤红细胞的过程。此外,我们评估了工作人员培训计划的效果,以确保临床常规操作的可重复性和方法标准化。
标记程序的验证过程在连续三天内对三名不同患者进行。使用肝素化注射器采集血样后,通过离心和洗涤步骤从其他血液成分中分离出红细胞。然后,在控制pH值后,向红细胞沉淀中加入焦磷酸亚锡(PYP)。红细胞的“预锡化”对于减少99mTc高锝酸盐进入红细胞后产生的99mTc是必要的。在用130MBq的99mTc高锝酸盐进行标记反应后,将红细胞在49°-50°C的水浴中变性10分钟。用剂量校准器测量血样的放射性,并确定标记效率(LE%)。使用γ计数器测量标记纯度,并使用公式计算:沉淀计数/沉淀计数+(上清液计数)×100。使用学习问卷(LQ)对培训计划进行评估。每个操作员(n = 3)的评分从6(“优秀”)到1(“无”)。
在整个过程直至最终样本中,均未观察到存在大聚集体。在连续三次测量的血样中,标记效率均达到非常高的值(平均值73.67%),标记纯度也很高(>95.22%)。在我们机构,我们使用标记热损伤RBC的脾脏成像来检测异位脾、脾组织植入、髓外造血。我们用标记热损伤RBC进行了3次操作,平均标记效率为73.67%。培训和学习计划按关键目标领域评分,平均值为5。
我们体外标记热损伤RBCs的过程简单且安全,提供了一种易于在临床常规中实施的有用技术用于脾脏成像。培训计划的学习成果被所有操作员评为有效,且随着时间推移保持了高效可重复的程序。