Chemistry Department, Indiana University, 800 E Kirkwood Ave, Bloomington, IN, 47405, USA.
J Am Soc Mass Spectrom. 2019 Dec;30(12):2741-2749. doi: 10.1007/s13361-019-02343-y. Epub 2019 Nov 1.
Charge detection mass spectrometry (CDMS) is a single-particle technique where the masses of individual ions are determined by simultaneously measuring their mass-to-charge ratio (m/z) and charge. Ions are usually trapped inside an electrostatic linear ion trap (ELIT) where they oscillate back and forth through a detection cylinder, generating a periodic signal that is analyzed by fast Fourier transforms. The oscillation frequency is related to the ion's m/z, and the magnitude is related to the ion's charge. In early work, multiple ion trapping events were discarded because there was a question about whether ion-ion interactions affected the results. Here, we report trajectory calculations performed to assess the influence of ion-ion interactions when multiple highly charged ions are simultaneously trapped in an ELIT. Ion-ion interactions cause trajectory and energy fluctuations that lead to variations in the oscillation frequencies that in turn degrade the precision and accuracy of the m/z measurements. The peak shapes acquire substantial high and low m/z tails, and the average m/z shifts to a higher value as the number of trapped ions increases. The effects of the ion-ion interactions are proportional to the product of the charges and the square root of the number of trapped ions and depend on the ions' m/z distribution. For the ELIT design examined here, ion-ion interactions limit the m/z resolving power to several hundred for a typical homogeneous ion population.
电荷检测质谱(CDMS)是一种单颗粒技术,通过同时测量单个离子的质荷比(m/z)和电荷,确定其质量。离子通常被捕获在静电线性离子阱(ELIT)中,在那里它们通过检测圆柱来回振荡,产生周期性信号,通过快速傅里叶变换进行分析。振荡频率与离子的 m/z 有关,幅度与离子的电荷有关。在早期的工作中,由于存在离子-离子相互作用是否会影响结果的问题,因此丢弃了多个离子捕获事件。在这里,我们报告了为评估当多个高电荷离子同时被捕获在 ELIT 中时离子-离子相互作用的影响而进行的轨迹计算。离子-离子相互作用会导致轨迹和能量波动,从而导致振荡频率发生变化,从而降低 m/z 测量的精度和准确性。峰形获得了大量的高和低 m/z 尾巴,并且随着捕获离子数量的增加,平均 m/z 向更高的值偏移。离子-离子相互作用的影响与电荷的乘积以及捕获离子的平方根成正比,并取决于离子的 m/z 分布。对于这里检查的 ELIT 设计,离子-离子相互作用将 m/z 分辨率限制为几百个典型的均匀离子群体。