Department of Orthopaedic Surgery, Cedars-Sinai Medical Center, Los Angeles, CA.
J Arthroplasty. 2020 Mar;35(3):779-785. doi: 10.1016/j.arth.2019.10.003. Epub 2019 Oct 7.
Achieving appropriate limb length and offset in total hip arthroplasty (THA) is challenging. Target limb length and offset may not always mean equal radiographic measurements bilaterally. The goal of this study is to introduce a method for determining as well as achieving target limb length and offset using digital radiographic measurements.
One hundred and two consecutive patients with unilateral hip osteoarthritis undergoing primary THA in the lateral decubitus position were included. Limb length and offset were measured on anterior-posterior pelvic radiographs preoperatively, intraoperatively, and postoperatively. Offset was defined as the length of a line parallel to the inter-teardrop line, extending from the edge of the ischium, at about the lower border of the ipsilateral obturator foramen, to the edge of the femoral cortex, usually at, or just below, the neck resection level. Target limb length was determined for each patient based on patient perception and severity of disease. Target offset equaled the contralateral limb. Using intraoperative digital radiography, adjustments were made until targets were achieved and the hip was stable. Patients were followed for an average of 4.2 years postoperatively.
Limb length was within 5 mm of target measurements in 100% of patients and offset was within 5 mm of targets in 97.1%. Target measurements differed by >5 mm from the contralateral side in 2.0% of limb length and 2.9% of offset measurements. There were no significant differences between intraoperative and postoperative limb length (P = .261) or offset (P = .747) measurements. At final follow-up, there were no dislocations or reoperations and average Hip disability and Osteoarthritis Outcome Score for Joint Replacement was 95.78.
Target limb length and offset goals can be determined for most patients undergoing THA. Targets are not always equal to the contralateral side. Intraoperative digital radiography can allow surgeons to accurately achieve target limb length and offset to within 5 mm in a homogenous cohort of patients with unilateral hip osteoarthritis with excellent clinical outcomes.
在全髋关节置换术(THA)中,实现适当的肢体长度和偏移量具有挑战性。目标肢体长度和偏移量并不总是意味着双侧的放射学测量值相等。本研究的目的是介绍一种使用数字放射学测量来确定和实现目标肢体长度和偏移量的方法。
纳入了 102 例在侧卧位接受初次单侧髋关节骨关节炎 THA 的连续患者。术前、术中及术后均在前后骨盆 X 线片上测量肢体长度和偏移量。偏移量定义为与泪滴线平行的线的长度,从坐骨边缘延伸,大约在对侧闭孔孔下缘,到股骨皮质边缘,通常在颈部切除水平或稍下方。根据患者的感知和疾病严重程度确定每位患者的目标肢体长度。目标偏移量与对侧肢体相等。使用术中数字放射学进行调整,直到达到目标且髋关节稳定为止。患者平均随访 4.2 年后。
100%的患者肢体长度在 5mm 以内,97.1%的患者偏移量在 5mm 以内。2.0%的肢体长度和 2.9%的偏移量测量值与对侧相差>5mm。术中与术后肢体长度(P=0.261)或偏移量(P=0.747)测量值无显著差异。最终随访时,无脱位或再次手术,平均髋关节残疾和骨关节炎髋关节置换评分(HHS)为 95.78。
大多数接受 THA 的患者可以确定目标肢体长度和偏移量。目标值并不总是与对侧相等。术中数字放射学可使外科医生在单侧髋关节骨关节炎同质患者队列中准确地将目标肢体长度和偏移量控制在 5mm 以内,取得良好的临床效果。