Suppr超能文献

用于茶碱高选择性印迹识别的丙烯酰胺改性3-氨丙基三乙氧基硅烷杂化单体

Acrylamide-Modified 3-Aminopropyltriethoxysilanes Hybrid Monomer for Highly Selective Imprinting Recognition of Theophylline.

作者信息

Lv Yaying, Qu Qi, Li Caiwen, Zhu Tao

机构信息

Tianjin Key Laboratory of Organic Solar Cells and Photochemical Conversion, School of Chemistry and Chemical Engineering, Tianjin University of Technology, Tianjin 300384, China.

出版信息

J Chromatogr Sci. 2019 Dec 19;58(1):75-82. doi: 10.1093/chromsci/bmz106.

Abstract

The hybrid monomer synthesized with 3-aminopropyltriethoxysilanes and acrylamide was applied for synthesis of molecularly imprinting polymers, and the obtained polymers were used as sorbent in solid-phase extraction for purification of theophylline (THP) in green tea. The static adsorption curves showed better molecular recognition ability and binding capability of the polymers for the target. On the optimized condition, a method was developed for increasing extraction of THP with satisfactory recovery of 93.7%. Good calibration linearity obtained in a range of 5-500 μg·mL-1. The recoveries at three spiked levels ranged from 86.7% to 100.7% with relative standard deviations ≤6.6% (n = 3). The result showed that the obtained polymers exhibited highly selective imprinting recognition to the analyte, and the number of templates was an important factor affecting the selective recognition ability of polymers. The proposed method with hybrid monomer imprinting polymers was successfully applied for purification of THP in green tea.

摘要

用3-氨丙基三乙氧基硅烷和丙烯酰胺合成的杂化单体用于合成分子印迹聚合物,所得聚合物用作固相萃取中的吸附剂,用于纯化绿茶中的茶碱(THP)。静态吸附曲线表明该聚合物对目标物具有较好的分子识别能力和结合能力。在优化条件下,建立了一种提高THP萃取率的方法,回收率达93.7%,令人满意。在5-500μg·mL-1范围内获得了良好的校准线性。三个加标水平的回收率在86.7%至100.7%之间,相对标准偏差≤6.6%(n = 3)。结果表明,所得聚合物对分析物表现出高度选择性的印迹识别,模板数量是影响聚合物选择性识别能力的重要因素。所提出的使用杂化单体印迹聚合物的方法成功应用于绿茶中THP的纯化。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验