Department of Bioprocess Engineering and Biotechnology, Universidade Federal do Paraná, Curitiba, Brazil.
Department of Bioprocess Engineering and Biotechnology, Universidade Federal do Paraná, Curitiba, Brazil.
J Biotechnol. 2020 Nov 10;323:17-23. doi: 10.1016/j.jbiotec.2020.06.015. Epub 2020 Jun 20.
Palm oil mill effluent (POME) was tested as a substrate to produce hydrogen by dark fermentation. Two microbial consortia and a pure culture of Clostridium beijerinckii (ATCC 8260) were cultured anaerobically in raw, diluted and hydrolyzed POME to compare biohydrogen production yields in all three media. Experiments were done in 15 mL Hungate tubes containing 5 mL of medium and 1 mL of inoculum. When Clostridium beijerinckii was cultivated at 30 °C in the hydrolyzed POME (P003), containing 7.5 g/L of sucrose, during 8 days of fermentation and 20 % of the inoculum, the maximum biohydrogen production yield was 4.62 LH/L. Consortium C3 also showed the best production in hydrolyzed POME while consortium C6 achieved its maximum production in raw POME. This effluent is a potential substrate for biohydrogen production.
棕榈油厂废水(POME)被测试作为一种基质,通过暗发酵来生产氢气。两种微生物群落和一株产丁酸梭菌(ATCC 8260)的纯培养物在原 POME、稀释 POME 和水解 POME 中进行厌氧培养,以比较这三种培养基中的生物氢气产量。实验在含有 5ml 培养基和 1ml 接种物的 15ml 亨盖特管中进行。当产丁酸梭菌在 30°C 下,在含有 7.5g/L 蔗糖的水解 POME(P003)中发酵 8 天,接种量为 20%时,最大生物氢气产量为 4.62LH/L。群落 C3 在水解 POME 中也表现出最好的生产能力,而群落 C6 在原 POME 中达到了最大的生产能力。这种废水是生物氢气生产的潜在基质。