Suppr超能文献

新型丝素蛋白、壳聚糖和海藻酸钠三重复合支架的制备及表征及其在结肠癌体外 3D 培养中的应用。

Preparation and Characterization of a Novel Triple Composite Scaffold Containing Silk Fiborin, Chitosan, and Alginate for 3D Culture of Colonic Carcinoma Cells In Vitro.

机构信息

Department of General Surgery, Fifth People's Hospital of Shanghai, Fudan University, Shanghai, China (mainland).

出版信息

Med Sci Monit. 2020 Aug 10;26:e922935. doi: 10.12659/MSM.922935.

Abstract

BACKGROUND Three-dimensional (3D) cell-culture scaffolds are ideal in vitro models to bridge the gap between two-dimensional cell culture in vitro and in vivo cancer models. Construction of 3D scaffolds using two kinds of biomaterials has been reported, but there are still many defects. To improve the performance of the scaffolds for 3D cell culture of colonic carcinoma (CC) cells in vitro, we attempted to construct triple composite scaffolds using silk fibroin (SF), chitosan (Cs), and alginate (Alg). MATERIAL AND METHODS We explored the suitability of triple composite scaffolds of SF/Cs/Alg at ratios of 1: 1: 0.5, 1: 1: 1, and 1: 1: 2 for 3D culture of CC cells, and used the dual composite scaffold of SF/Cs (1: 1) as a control group. We analyzed the physicochemical characteristics of these scaffolds and studied cell adhesion, cell proliferation, migration, colony-forming ability, microstructure and ultrastructure, and spheroid-forming capacity of the commercially available CC cell line HCT-116 on the prepared scaffolds. RESULTS Our results show that SF/Cs/Alg (1: 1: 1) scaffolds demonstrated the best profile, the highest uniform porosity and connectivity, and excellent hydroscopicity, and also exhibited appropriate and controlled swelling and degradation characteristics. The adhesion, proliferation, colony-forming, and wound-healing assays, green fluorescent protein-labeled HCT116 cell imaging, 4',6-diamidino-2-phenylindole and DY-554-phalloidin staining, scanning electron microscopy, and haematoxylin and eosin staining revealed that the triple composite scaffolds of SF/CS/Alg (1: 1: 1) supported cell adhesion, proliferation, migration, colony-forming ability, and spheroid formation far better than the dual composite scaffold of SF/CS (1: 1). CONCLUSIONS This study successfully demonstrated the potential of SF/Cs/Alg (1: 1: 1) scaffold as an alternative for the 3D in vitro culture of CC cells.

摘要

背景

三维(3D)细胞培养支架是在二维细胞培养与体内癌症模型之间架起桥梁的理想体外模型。已经有报道使用两种生物材料构建 3D 支架,但仍存在许多缺陷。为了提高支架用于体外培养结肠癌细胞(CC)的 3D 细胞的性能,我们尝试使用丝素蛋白(SF)、壳聚糖(Cs)和藻酸盐(Alg)构建三重复合支架。

材料和方法

我们探索了 SF/Cs/Alg 比例为 1:1:0.5、1:1:1 和 1:1:2 的三重复合支架用于 CC 细胞 3D 培养的适用性,并将 SF/Cs(1:1)的双重复合支架作为对照组。我们分析了这些支架的理化特性,并研究了商业上可获得的 CC 细胞系 HCT-116 在制备的支架上的细胞黏附、细胞增殖、迁移、集落形成能力、微观结构和超微结构以及球体形成能力。

结果

我们的结果表明,SF/Cs/Alg(1:1:1)支架表现出最佳的形态、最高的均匀孔隙率和连通性以及出色的吸湿性,并且还表现出适当且可控的溶胀和降解特性。细胞黏附、增殖、集落形成和划痕愈合测定、绿色荧光蛋白标记的 HCT116 细胞成像、4',6-二脒基-2-苯基吲哚和 DY-554-鬼笔环肽染色、扫描电子显微镜和苏木精和伊红染色表明,SF/CS/Alg(1:1:1)三重复合支架比 SF/CS(1:1)双重复合支架更能支持细胞黏附、增殖、迁移、集落形成能力和球体形成。

结论

本研究成功地证明了 SF/Cs/Alg(1:1:1)支架作为 CC 细胞 3D 体外培养替代物的潜力。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/ab20/7439765/f36427be1930/medscimonit-26-e922935-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验