Randazzo John B, Sivaramakrishnan Raghu, Jasper Ahren W, Sikes Travis, Lynch Patrick T, Tranter Robert S
Chemical Sciences and Engineering Division, Argonne National Laboratory, 9700 S. Cass Avenue, Lemont, IL 60439, USA.
Phys Chem Chem Phys. 2020 Sep 7;22(33):18304-18319. doi: 10.1039/d0cp02404j. Epub 2020 Aug 12.
The high temperature gas phase chemistry of the four butyl radical isomers (n-butyl, sec-butyl, iso-butyl, and tert-butyl) was investigated in a combined experimental and theoretical study. Organic nitrites were used as convenient and clean sources of each of the butyl radical isomers. Rate coefficients for dissociation of each nitrite were obtained experimentally and are at, or close to, the high pressure limit. Low pressure experiments were performed in a diaphragmless shock tube with laser schlieren densitometry at post-shock pressures of 65, 130, and 260 Torr and post-shock temperatures of 700-1000 K. Additional experiments were conducted with iso-butyl radicals at 805 K and 8.7 bar to elucidate changes in mechanism at higher pressures. These experiments were performed in a miniature shock tube with synchrotron-based photoionization mass spectrometry. The mass spectra confirmed that scission of the O-NO bond is the primary channel by which the precursors dissociate, but they also provided evidence of a minor channel (<7.7%) through HNO loss and formation of an aldehyde. These high pressure experiments were also used to determine the disproportionation/recombination ratio for iso-butyl radicals as 0.3. Reanalysis of the lower-temperature literature and the present data yielded rate constants for the disproportionation reaction, iso-butyl + iso-butyl = iso-butene + iso-butane. A chemical kinetics model was developed for the reactions of the butyl isomers that included new paths for highly energized adducts. These adducts are formed by the addition of H, CH or CH to the butyl radicals. Accompanying theoretical investigations show that chemically activated pathways are competitive with stabilization of the adduct by collision under the conditions of the laser schlieren experiments. These calculations also show that at 10 bar and T < 1000 K stabilization is the only important reaction, but at higher temperatures, even at 10 bar, chemically activated product channels should also be considered. Branching fractions and rate coefficients are presented for these reactions. This study also highlights the importance of the radical structure for determining branching ratios for disproportionation and recombination of alkyl radicals, and these were facilitated by theoretical calculations of recombination rate coefficients for the four butyl radical isomers. The results reveal previously unknown features of butyl radical chemistry under conditions that are relevant to a wide range of applications and reaction mechanisms are presented that incorporate pressure dependent rate coefficients for the key steps.
在一项结合实验和理论的研究中,对四种丁基自由基异构体(正丁基、仲丁基、异丁基和叔丁基)的高温气相化学进行了研究。有机亚硝酸盐被用作每种丁基自由基异构体方便且清洁的来源。通过实验获得了每种亚硝酸盐分解的速率系数,这些系数处于或接近高压极限。低压实验在无隔膜激波管中进行,采用激光纹影密度测量法,激波后压力为65、130和260托,激波后温度为700 - 1000 K。还在805 K和8.7巴的条件下对异丁基自由基进行了额外实验,以阐明在更高压力下机理的变化。这些实验在带有同步加速器光电离质谱仪的微型激波管中进行。质谱证实,O - NO键的断裂是前体解离的主要通道,但它们也提供了一个通过损失HNO并形成醛的次要通道(<7.7%)的证据。这些高压实验还用于确定异丁基自由基的歧化/重组比为0.3。对低温文献和当前数据的重新分析得出了歧化反应“异丁基 + 异丁基 = 异丁烯 + 异丁烷”的速率常数。针对丁基异构体的反应开发了一个化学动力学模型,该模型包括了高能加合物的新反应路径。这些加合物是通过H、CH或CH加到丁基自由基上形成的。伴随的理论研究表明,在激光纹影实验条件下,化学活化路径与加合物通过碰撞稳定化相互竞争。这些计算还表明,在10巴和T < 1000 K时,稳定化是唯一重要的反应,但在更高温度下,即使在10巴时,也应考虑化学活化产物通道。给出了这些反应的分支分数和速率系数。这项研究还强调了自由基结构对于确定烷基自由基歧化和重组分支比的重要性,并且通过对四种丁基自由基异构体重组速率系数的理论计算促进了这一点。结果揭示了在与广泛应用相关的条件下丁基自由基化学中以前未知的特征,并提出了包含关键步骤压力依赖性速率系数的反应机理。