Suppr超能文献

经颈(SP)与经胸骨后达芬奇机器人食管切除术:尸体研究。

Transcervical (SP) and Transhiatal DaVinci Robotic Esophagectomy: A Cadaveric Study.

机构信息

Department of General-, Visceral- and Transplant Surgery, Universitaetsmedizin Mainz, Mainz, Germany.

Department for General, Visceral-, Thoracic-, Transplantation-, and Pediatric Surgery, Kurt Semm Center for Minimal Invasive and Robotic Surgery, University Hospital Schleswig Holstein, Campus Kiel, Kiel, Germany.

出版信息

Thorac Cardiovasc Surg. 2021 Apr;69(3):198-203. doi: 10.1055/s-0040-1716323. Epub 2020 Sep 8.

Abstract

BACKGROUND

This is a preclinical cadaveric study to investigate the feasibility of a fully robotic McKeown esophagectomy in simultaneous rendezvous technique using the DaVinci X for transhiatal dissection and the DaVinci single port (SP) for transcervical dissection.

METHODS

Two transcervical esophagectomies with the DaVinci SP surgical system were performed as training procedures. In the third transcervical cadaveric procedure, the DaVinci SP was installed for the transcervical approach and the DaVinci X surgical system for the abdominal transhiatal phase. Primary outcomes were operating time and lymphadenectomy.

RESULTS

The mobilization of the esophagus was successfully completed in 118 minutes by using the DaVinci SP for the transcervical phase and the DaVinci X for the transhiatal abdominal phase simultaneously. In total 18 lymph nodes were dissected in the thorax; 3 were located paratracheal right, 3 paratracheal left, 4 subcarinal, 4 para-aortic, 2 paraesophageal upper mediastinal, and 2 paraesophageal middle mediastinal.

CONCLUSION

This preclinical study demonstrated that a fully robotic McKeown esophagectomy in simultaneous rendezvous technique using the DaVinci X for transhiatal dissection and the DaVinci SP for transcervical dissection was feasible with adequate lymphadenectomy in a cadaver model. Future research will elucidate the indications for the use of the fully robotic transhiatal and transcervical esophagectomy.

摘要

背景

这是一项临床前尸体研究,旨在探讨使用达芬奇 X 进行经食管裂孔入路全机器人 McKeown 食管切除术和达芬奇单端口(SP)进行经颈入路的同步会师技术的可行性。

方法

进行了 2 例达芬奇 SP 系统经颈入路全机器人食管切除术作为培训程序。在第 3 例经颈尸体手术中,达芬奇 SP 用于经颈入路,达芬奇 X 系统用于经腹经食管裂孔术。主要结局是手术时间和淋巴结清扫。

结果

通过达芬奇 SP 进行经颈入路,达芬奇 X 进行经腹经食管裂孔术,成功地在 118 分钟内完成了食管的游离。共在胸腔内解剖出 18 个淋巴结,其中 3 个位于右气管旁,3 个位于左气管旁,4 个位于隆突下,4 个位于腹主动脉旁,2 个位于食管上纵隔,2 个位于食管中纵隔。

结论

本临床前研究表明,使用达芬奇 X 进行经食管裂孔入路全机器人 McKeown 食管切除术和达芬奇 SP 进行经颈入路的同步会师技术是可行的,在尸体模型中可以进行充分的淋巴结清扫。未来的研究将阐明全机器人经食管裂孔和经颈入路食管切除术的适应证。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验